86203
1.INSTALL RADIO WIRE
Attach the clamps to install the radio wire.
55303B
2.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
86190C
3.INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY
w/o 4WD Switch:
|
Install in this Direction |
Attach the claws to install the No. 1 stereo jack adapter assembly.
w/ 4WD Switch:
|
Install in this Direction |
Attach the claws to install the No. 1 stereo jack adapter assembly.
55407C
4.INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY
55900
5.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
84013A
6.INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Cooler System)
55905J
7.INSTALL CONTROL KNOB SUB-ASSEMBLY (for Manual Cooler System)
55405B
8.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
55011A
9.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
55012A
10.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
55667
11.INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH
12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).