73310D
1.INSTALL REAR CENTER SEAT 3 POINT TYPE BELT ASSEMBLY
| *a | Bolt A |
| *b | Bolt B |
Attach the 2 guides and temporarily install the rear center seat 3 point type belt assembly with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
Attach the guide and install the through anchor of the rear center seat 3 point type belt assembly.
Check that the rear center seat 3 point type belt assembly is not twisted.
73345
2.INSTALL REAR CENTER SEAT SHOULDER BELT GUIDE
| *a | Seat Belt |
| *b | Back of Rear Center Seat Shoulder Guide |
Attach the guide and temporarily install the rear center seat shoulder guide with the 4 bolts.
Install the rear center seat shoulder belt guide so that the seat belt passes between it and the vehicle as shown in the illustration.
Tighten the 4 bolts in the order shown in the illustration.
62180A
3.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH
63310
4.INSTALL ROOF HEADLINING ASSEMBLY
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
6.PERFORM DIAGNOSTIC SYSTEM CHECK
7.CHECK SRS WARNING LIGHT