Home › Engine / Hybrid System › 2KD-FTV ENGINE MECHANICAL › REAR CRANKSHAFT OIL SEAL › from 2016.01
RM3270E _51 Engine / Hybrid System _048931 2KD-FTV ENGINE MECHANICAL _0243271 REAR CRANKSHAFT OIL SEAL A

2KD-FTV ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 33030 1.REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY

Hide 31210 2.REMOVE CLUTCH COVER ASSEMBLY

Hide 31250 3.REMOVE CLUTCH DISC ASSEMBLY

Hide 13405 4.REMOVE FLYWHEEL SUB-ASSEMBLY

Hide 11381A 6.REMOVE REAR ENGINE OIL SEAL

a.
A352054C01
0.229,1.656 0.417,1.469 0.417,1.469 0.5,1.469 false 1.042,1.844 1.229,1.99 1.229,1.99 1.313,1.99 false 0.25,0.667 0.417,0.729 0.417,0.729 0.5,0.729 true 0.521,1.354 0.833,1.552 0.313,0.198 10 false *a 1.344,1.885 1.656,2.083 0.313,0.198 10 false *a 0.521,0.625 0.833,0.823 0.313,0.198 10 false *a
*a Cut Position


Using a knife, cut off the lip of the rear engine oil seal.


b.

Using a cloth and screwdriver, pry out the rear engine oil seal from the rear engine oil seal retainer.

NOTICE:

Be careful not to damage the crankshaft and rear engine oil seal retainer.


HINT:
·

After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.

·

Tape the screwdriver tip before use.