Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
55667
1.REMOVE INSTRUMENT PANEL REGISTER BEZEL GARNISH
55011A
2.REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
55012A
3.REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
55405B
4.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
86120
5.REMOVE RADIO RECEIVER ASSEMBLY (w/ Audio, for Radio Receiver Type)
86140A
6.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio, for Radio and Display Type)
86120L
7.REMOVE NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System)
55905J
8.REMOVE CONTROL KNOB SUB-ASSEMBLY
for Manual Air Conditioning System:
for Manual Cooler System:
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING PANEL(for Manual Cooler System)>REMOVAL
84013A
9.REMOVE INTEGRATION PANEL SUB-ASSEMBLY
for Manual Air Conditioning System:
for Manual Cooler System:
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING PANEL(for Manual Cooler System)>REMOVAL
55900
10.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
55407C
11.REMOVE LOWER INSTRUMENT COVER SUB-ASSEMBLY
85530
12.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
|
Protective Tape |
|
Remove in this Direction |
Using a thin-bladed screwdriver, detach the claw, and remove the No. 1 power outlet socket assembly as shown in the illustration.
Tape the thin-bladed screwdriver tip before use.
85535B
13.REMOVE NO. 1 POWER OUTLET SOCKET COVER
|
Remove in this Direction |
Detach the claw and remove the No. 1 power outlet socket cover as shown in the illustration.