2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. DISCHARGE FUEL SYSTEM PRESSURE
  1. Discharge the fuel system pressure (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY
  1. Remove the throttle motor with body assembly (Click here).


4. DISCONNECT FUEL HOSE

A224893
  1. Disconnect the fuel hose (Click here).


5. DISCONNECT NO. 2 FUEL HOSE

A224894
  1. Disconnect the No. 2 fuel hose.


6. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY

A223394
  1. Remove the 2 bolts and fuel pressure pulsation damper.


7. REMOVE FUEL DELIVERY PIPE WITH FUEL INJECTOR

A223374
  1. Disconnect the 4 injector connectors.

  1. Disconnect the purge VSV connector.

  1. Detach the wire harness clamp.

  1. Remove the bolt and wire harness clamp bracket.

  1. A225452
    Remove the bolt and disconnect the purge VSV.

  1. A223376
    Remove the 2 bolts and fuel delivery pipe together with the fuel injectors.

    NOTICE:
    Be careful not to drop the fuel injectors when removing the fuel delivery pipe.

  1. A223377
    Remove the 2 No. 1 delivery pipe spacers.

  1. Remove the 4 injector vibration insulators.

  1. Using a screwdriver, remove the 4 spacers.


8. REMOVE FUEL INJECTOR ASSEMBLY

  1. A223378
    Remove the 4 fuel injectors from the fuel delivery pipe.
    Text in Illustration 
    V100135
    Pull Out

← REMOVAL (Aug 2013 – Jul 2014)INSPECTION (Aug 2013 – Jul 2014) →