INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL TILT AND TELESCOPIC SWITCH |
Attach the claw to install the tilt and telescopic switch.
Connect the connector.
| 2. INSTALL STEERING COLUMN LOWER COVER |
Install the 3 screws.
Attach the 2 claws to install the steering column lower cover.
- NOTICE:
- Do not damage the tilt and telescopic switch.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- Reset the auto tilt away function setting to the previous condition by changing the customize parameter (Click here).
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
- Reset the auto tilt away function setting to the previous condition by changing the customize parameter (Click here).
| 4. CHECK SRS WARNING LIGHT |
