Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.
REMOVE REAR NO. 2 SEAT ASSEMBLY LH
for Manual Seat Type: Remove the rear No. 2 seat assembly LH (Click here).
for Power Seat Type: Remove the rear No. 2 seat assembly LH (Click here).
2.
REMOVE REAR NO. 1 FLOOR STEP COVER
HINT:
Use the same procedure for all rear No. 1 floor step covers.
Using a screwdriver, detach the 2 claws and remove the rear No. 1 floor step cover.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
3.
REMOVE QUARTER SCUFF PLATE LH
Remove the 2 bolts and quarter scuff plate.
4.
REMOVE REAR DOOR SCUFF PLATE LH
Put protective tape around the rear door scuff plate.
Using a screwdriver, detach the 3 clips, 6 claws and 2 guides and remove the rear door scuff plate.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
5.
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
Partially remove the rear door opening trim weatherstrip so that the front quarter trim panel assembly LH and deck trim side panel assembly LH can be removed (Click here).
6.
REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)
Remove the 3 bolts and floor side rail.
7.
REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)
HINT:
Use the same procedure described for the LH side.
8.
REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER
HINT:
Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.
Detach the 3 claws and remove the rear No. 1 seat outer lap belt anchor cover.
9.
REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
HINT:
Use the same procedure for the other No. 1 luggage compartment trim hook.
Remove the luggage compartment trim hook by turning it clockwise.
Use the same procedure for the other No. 1 tonneau cover holder cap.
Using a screwdriver, detach the 2 claws and remove the No. 1 tonneau cover holder cap.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
11.
REMOVE FRONT DECK SIDE TRIM COVER LH (w/ Tonneau Cover)
HINT:
Use the same procedure for the other front deck side trim cover.
Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
12.
REMOVE ASSIST GRIP PLUG
HINT:
Use the same procedure for all assist grip plugs.
Using a screwdriver, detach the 2 claws and remove the assist grip plug.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
13.
REMOVE ASSIST GRIP SUB-ASSEMBLY
HINT:
Use the same procedure for the other assist grip.
Remove the 2 bolts and assist grip.
14.
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.
Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.
for RH Side: Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.
Detach the 4 clips and 8 claws and remove the deck trim side panel.
15.
REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH
w/o Rear No. 2 Seat:
Detach the 7 clips and 2 guides and remove the rear quarter trim panel.
w/ Rear No. 2 Seat:
Detach the 7 clips and 2 guides.
Detach the 4 clips and 2 guides, pass the rear No. 2 seat outer belt floor anchor through the rear quarter trim panel and remove the rear quarter trim panel.
16.
REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH
Remove the bolt and rear No. 1 seat outer belt shoulder anchor.
Remove the bolt and rear No. 2 seat outer belt assembly.
17.
REMOVE REAR SEAT OUTER BELT ANCHOR PLATE SUB-ASSEMBLY LH
Remove the bolt and anchor plate.
18.
REMOVE SEAT BELT ANCHOR PLATE ASSEMBLY (for RH Side)