REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE REAR CONSOLE BOX ASSEMBLY |
for Automatic Transmission:
Remove the rear console box assembly (Click here).
for Manual Transmission:
Remove the rear console box assembly (Click here).
w/ Refrigerated Cool Box:
Remove the rear console box assembly (Click here).
for Bench Seat Type:
Remove the rear console box assembly (Click here).
| 2. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY |
Release the parking brake lever.
Disconnect the parking brake switch connector.
Remove the adjusting nut.

Disconnect the No. 2 parking brake cable and No. 3 parking brake cable from the No. 1 parking brake pull rod.

Remove the No. 1 parking brake pull rod, bush and compression spring from the parking brake lever.
Remove the straight pin from the parking brake lever.
Remove the 4 bolts and parking brake lever.

| 3. REMOVE PARKING BRAKE SWITCH ASSEMBLY |
Remove the screw and parking brake switch from the parking brake lever.

Disconnect the connector.

