2013-2015 Land Cruiser Prado · Service Manual Brake

REMOVAL

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR CONSOLE BOX ASSEMBLY
  1. for Automatic Transmission:
    Remove the rear console box assembly (Click here).

  1. for Manual Transmission:
    Remove the rear console box assembly (Click here).

  1. w/ Refrigerated Cool Box:
    Remove the rear console box assembly (Click here).

  1. for Bench Seat Type:
    Remove the rear console box assembly (Click here).


2. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
  1. Release the parking brake lever.

  1. Disconnect the parking brake switch connector.

  1. C217137
    Remove the adjusting nut.

  1. C217139
    Disconnect the No. 2 parking brake cable and No. 3 parking brake cable from the No. 1 parking brake pull rod.

  1. Remove the No. 1 parking brake pull rod, bush and compression spring from the parking brake lever.

  1. Remove the straight pin from the parking brake lever.

  1. C217138
    Remove the 4 bolts and parking brake lever.


3. REMOVE PARKING BRAKE SWITCH ASSEMBLY

  1. C217136
    Remove the screw and parking brake switch from the parking brake lever.

  1. C177240
    Disconnect the connector.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2014) →