REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1.
REMOVE UPPER RADIATOR SUPPORT SEAL
|
 |
Remove the 13 clips and upper radiator support seal.
| 2.
REMOVE RADIATOR GRILLE
|
 |
Put protective tape around the radiator grille.
Remove the 4 screws.
Detach the 8 claws and remove the radiator grille.
Text in Illustration
*1
|
Protective Tape
|
| 3.
REMOVE FRONT BUMPER COVER |
 |
- Remove the 2 screws.
- HINT:
- Use the same procedure for the screws on the other side.
- Remove the 2 screws.
Text in Illustration
*1
|
Screw
|
*2
|
Bolt A
|
*3
|
Bolt B
|
Remove the 2 bolts labeled A and 2 bolts labeled B.
- Put protective tape around the front bumper cover.
Text in Illustration
*1
|
Protective Tape
|
Remove the 4 clips.
Detach the 16 claws and remove the front bumper cover.
- NOTICE:
- Do not hold the middle of the front bumper cover, as it may become reformed.
w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:
Disconnect the 3 connectors.
w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:
Disconnect the connector.
w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:
Disconnect the 2 connectors.
w/ Headlight Cleaner System:
Disconnect the No. 1 headlight cleaner hose.
| 4.
REMOVE FRONT BUMPER ENERGY ABSORBER |
 |
- Remove the front bumper energy absorber.
| 5.
REMOVE FRONT BUMPER LOWER COVER |
 |
- Remove the clip.
Remove the 5 bolts and front bumper lower cover.
| 6.
REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
 |
- Remove the 6 nuts and front bumper reinforcement sub-assembly.
| 7.
REMOVE FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY LH |
 |
- Remove the 4 bolts and front bumper No. 2 extension sub-assembly LH.
| 8.
REMOVE FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY RH |
 |
- HINT:
- Use the same procedure described for the LH side.
| 9.
REMOVE FRONT BUMPER SIDE SUPPORT LH |
 |
- Remove the screw and bolt.
Detach the 2 claws and remove the front bumper side support LH.
| 10.
REMOVE FRONT BUMPER SIDE SUPPORT RH |
 |
- HINT:
- Use the same procedure described for the LH side.
| 11.
REMOVE FRONT BUMPER CENTER UPPER RETAINER |
 |
- Remove the 3 bolts and front bumper center upper retainer.
| 12.
REMOVE HEADLIGHT ASSEMBLY LH |
 |
for Halogen Headlight:
(Click here)
for LED Headlight:
(Click here)
| 13.
REMOVE HEADLIGHT ASSEMBLY RH |
 |
- HINT:
- Use the same procedure described for the LH side.
| 14.
REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY LH |
 |
- Remove the 2 bolts and front bumper bracket sub-assembly LH.
| 15.
REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY RH |
 |
- HINT:
- Use the same procedure described for the LH side.