2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

B15F5 A/C ECU Vehicle Information Reading/Writing Processor Malfunction

Diagnostic trouble codes · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

This DTC is stored when items controlled by the Air conditioning amplifier assembly cannot be customized via the navigation system vehicle customization screen.

HINT:
The Air conditioning amplifier assembly controls the air conditioning system related items that are customizable via the navigation receiver assembly screen.

DTC Code
DTC Detection Condition
Trouble Area
B15F5
Air conditioning amplifier assembly vehicle setting processing error.
  1. CAN communication system
  2. Air conditioning system
  3. Air conditioning amplifier assembly
  4. Navigation receiver assembly

INSPECTION PROCEDURE

HINT:
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


1. CHECK CAN COMMUNICATION SYSTEM
  1. Use the GTS to check if the CAN communication system is functioning normally.

    1. for LHD : Click here
    2. for RHD : Click here

    OK:
    CAN communication DTCs are not output.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for LHD)
    B
    NG (for RHD)
    C



B
GO TO CAN COMMUNICATION SYSTEM (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (Click here)
A


2. CHECK AIR CONDITIONING SYSTEM
  1. Check if the air conditioning system is malfunctioning (Click here).

    HINT:
    Customization may not be possible depending on the malfunction in the air conditioning system.

    OK:
    No malfunctions are present in the air conditioning system.



NG
GO TO AIR CONDITIONING SYSTEM (Click here)
OK


3. CHECK CUSTOMIZE ITEMS
  1. Display the "Vehicle Customization" screen.

  1. Make a note of the customizable items for the air conditioning system.

    HINT:
    These air conditioning system items shown as customizable via the navigation receiver assembly vehicle customization screen can also be changed using the GTS. In the following steps, the GTS will be used.

    1. To match-up the items in the navigation receiver assembly with the items on the GTS, check the customize parameters list for the air conditioning system related items that can be customized via the navigation receiver assembly screen (Click here).

  1. Using the GTS, confirm that it is possible to change the settings of the air conditioning system related customize parameters that are shown as customizable via the navigation receiver assembly screen.

    OK:
    The items available for customization via the navigation receiver assembly screen can be customized successfully using the GTS.



NG
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)


← B15F5 A/C ECU Vehicle Information Reading/Writing Processor Malfunction (Aug 2013 – Jul 2014)B15F6 Main Body ECU Vehicle Information Reading/Writing Process Malfunction (Aug 2013 – Jul 2014) →