B15F6 Main Body ECU Vehicle Information Reading/Writing Process Malfunction
Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the navigation system vehicle customization screen.- HINT:
-
The main body ECU (multiplex network body ECU) controls the items for the following systems that are customizable via the radio and display receiver assembly screen:
- Power door lock control system
- Wireless door lock control system
- Lighting system (INT)
- Lighting system (EXT)
- Power door lock control system
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B15F6 |
Main body ECU (multiplex network body ECU) vehicle setting processing error. |
|
INSPECTION PROCEDURE
| 1. CHECK CAN COMMUNICATION SYSTEM |
Use the GTS to check if the CAN communication system is functioning normally.
- for LHD : Click here
- for RHD : Click here
- OK:
- CAN communication DTCs are not output.
Result Result
Proceed to
OK
A
NG (for LHD)
B
NG (for RHD)
C
- for LHD : Click here
|
|
||||
|
|
||||
| A | |
| 2. CHECK POWER DOOR LOCK CONTROL SYSTEM |
Check if the power door lock control system is malfunctioning (Click here).
- HINT:
- Customization may not be possible depending on the malfunction in the power door lock control system.
- OK:
- No malfunctions are present in the power door lock control system.
|
|
||||
| OK | |
| 3. CHECK WIRELESS DOOR LOCK CONTROL SYSTEM |
Check if the wireless door lock control system is malfunctioning (Click here).
- HINT:
- Customization may not be possible depending on the malfunction in the wireless door lock control system.
- OK:
- No malfunctions are present in the wireless door lock control system.
|
|
||||
| OK | |
| 4. CHECK LIGHTING SYSTEM (INT) |
Check if the lighting system (INT) is malfunctioning (Click here).
- HINT:
- Customization may not be possible depending on the malfunction in the lighting system (INT).
- OK:
- No malfunctions are present in the lighting system (INT).
|
|
||||
| OK | |
| 5. CHECK LIGHTING SYSTEM (EXT) |
Check if the lighting system (EXT) is malfunctioning (Click here).
- HINT:
- Customization may not be possible depending on the malfunction in the lighting system (EXT).
- OK:
- No malfunctions are present in the lighting system (EXT).
|
|
||||
| OK | |
| 6. CHECK CUSTOMIZE ITEMS |
Display the "Vehicle Customization" screen.
Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.
- HINT:
- These items shown as customizable via the radio and display receiver assembly vehicle customization screen can also be changed using the GTS. In a following step, the GTS will be used.
To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the power door lock control system related items that can be customized via the radio and display receiver assembly screen (Click here).
To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the wireless door lock control system related items that can be customized via the radio and display receiver assembly screen (Click here).
To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the lighting system (INT) related items that can be customized via the radio and display receiver assembly screen (Click here).
To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the lighting system (EXT) related items that can be customized via the radio and display receiver assembly screen (Click here).
Using the GTS, confirm that it is possible to change the settings of the customize parameters that are available for customization via the radio and display receiver assembly screen.
- OK:
- The items available for customization via the radio and display receiver assembly screen can be customized successfully using the GTS.
|
|
||||
| OK | ||
| ||
