B15F8 D-Seat ECU Vehicle Information Reading/Writing Process Malfunction
Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
- *1: for LHD
- *2: for RHD
- HINT:
- The front power seat switch LH*1 or front power seat switch RH*2 controls the front power seat control system related items that are customizable via the radio and display receiver assembly screen.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B15F8 |
Front power seat switch LH*1 or front power seat switch RH*2 vehicle setting processing error. |
|
INSPECTION PROCEDURE
| 1. CHECK CAN COMMUNICATION SYSTEM |
Use the GTS to check if the CAN communication system is functioning normally.
- for LHD : Click here
- for RHD : Click here
- OK:
- CAN communication system DTCs are not output.
Result Result
Proceed to
OK
A
NG (for LHD)
B
NG (for RHD)
C
- for LHD : Click here
|
|
||||
|
|
||||
| A | |
| 2. CHECK FRONT POWER SEAT CONTROL SYSTEM |
Check if the front power seat control system is malfunctioning (Click here).
- HINT:
- Customization may not be possible depending on the malfunction in the front power seat control system.
- OK:
- No malfunctions are present in the front power seat control system.
|
|
||||
| OK | |
| 3. CHECK CUSTOMIZE ITEMS |
Display the "Vehicle Customization" screen.
Make a note of the customizable items for front power seat switch LH related system.
- HINT:
- These items shown as customizable via the radio and display receiver assembly vehicle customization screen can also be changed using the GTS. In a following step, the GTS will be used.
Check the customize parameters list for the front power seat control system related items that can be customized via the radio and display receiver assembly screen (Click here).
Manually change and confirm that it was possible to successfully change the settings of the customize parameters for each system that are available for customization via the radio and display receiver assembly screen.
- OK:
- The items available for customization via the radio and display receiver assembly screen can be customized successfully using the manual procedure.
Result Result
Proceed to
OK
A
NG (for LHD)
B
NG (for RHD)
C
|
|
||||
|
|
||||
| A | ||
| ||
