GENERAL MAINTENANCE
Removal / installation · Vehicles built from Aug 2013
| 1. INSPECT BRAKE LINE PIPES AND HOSES |
- HINT:
- Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.
Using a mirror, check the entire circumference and length of the brake lines and hoses for:

- Damage
- Wear
- Deformation
- Cracks
- Corrosion
- Leaks
- Bends
- Twists
- Damage
Check all the clamps for tightness and the connections for leakage.
Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.
Check that the lines are installed properly and pass through the center of the grommets.
| 2. INSPECT BRAKE LININGS, DRUMS, PADS AND DISCS |
Check the brake linings and drums of the parking brake (Click here).
Check the brake pads and discs.
Type
See Procedure
Front
Click here
Rear
Click here
- HINT:
-
-


- If a squealing or scraping noise is heard from the brake while driving, check the pad wear indicator.
- If there are traces of the indicator contacting the disc rotor, the disc pad should be replaced.
-
| 3. INSPECT BRAKE FLUID |
| Type |
See Procedure |
| Hydraulic Brake Booster |
Click here
|
| Vacuum Brake Booster |
Click here
|
| 4. REPLACE BRAKE FLUID |
| Type |
See Procedure |
| Hydraulic Brake Booster |
Click here
|
| Vacuum Brake Booster |
Click here
|
| 5. INSPECT CLUTCH PEDAL |
| Type |
See Procedure |
| LHD |
Click here
|
| RHD |
Click here
|
| 6. INSPECT CLUTCH FLUID |
Check the clutch fluid (Click here).
| 7. REPLACE CLUTCH FLUID |
Replace the clutch fluid (Click here).
| 8. INSPECT VACUUM PUMP |
| Type |
See Procedures |
| for 1KD-FTV |
Click here
|
| for 5L-E |
Click here
|
| 9. INSPECT BRAKE PEDAL AND PARKING BRAKE |
| Type |
See Procedure |
| for Hydraulic Brake Booster |
Click here
|
| for Vacuum Brake Booster |
Click here
|
| Parking brake |
Click here
|
