PROBLEM SYMPTOMS TABLE
Troubleshooting · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom |
Suspected Area |
See page |
| Cruise control switch cannot be turned on (Cruise control indicator light in combination meter assembly does not illuminate) |
Cruise control switch circuit |
Click here
|
| Cruise main indicator light circuit |
Click here
|
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| SET not occurring or CANCEL occurring (DTC is not output) |
Cruise control switch circuit |
Click here
|
| Combination meter assembly |
Click here
|
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| Actual vehicle speed deviates above or below set speed |
Hydraulic brake booster assembly (for LHD) [for 1GR-FE, 1KD-FTV] |
Click here
|
| Hydraulic brake booster assembly (for RHD) [for 1GR-FE, 1KD-FTV] |
Click here
|
|
| Brake actuator assembly (for 2TR-FE) |
Click here
|
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| Cruise control not canceled when brake pedal is depressed |
Stop light switch circuit |
Click here
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| Cruise control not canceled when shift lever is moved to N (for Automatic Transmission) |
Park/neutral position switch assembly |
Click here
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| Transmission control ECU assembly (for 1KD-FTV) |
Click here
|
|
| Cruise control not canceled when clutch pedal is depressed (for Manual Transmission) |
Clutch switch circuit |
Click here
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| Control switch does not operate (-SET, +RES, CANCEL not possible) |
Cruise control switch circuit |
Click here
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| SET possible at 40 km/h (25 mph) or less, or CANCEL does not operate |
Hydraulic brake booster assembly (for LHD) [for 1GR-FE, 1KD-FTV] |
Click here
|
| Hydraulic brake booster assembly (for RHD) [for 1GR-FE, 1KD-FTV] |
Click here
|
|
| Brake actuator assembly (for 2TR-FE) |
Click here
|
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| Poor response in ACCEL and RESUME modes |
Cruise control switch circuit |
Click here
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| DTC memory is cleared |
ECM (for 1GR-FE) |
Click here
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| DTC is not output or is output when it should not be |
TC and CG terminal circuit |
Click here
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| CRUISE main indicator light does not illuminate |
Cruise control switch circuit |
Click here
|
| Cruise main indicator circuit |
Click here
|
|
| Combination meter assembly |
Click here
|
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|
|
| The cruise control SET indicator light does not come on (SET function operates normally) |
Cruise SET indicator light circuit |
Click here
|
| ECM (for 1GR-FE) |
Click here
|
|
| ECM (for 2TR-FE) |
Click here
|
|
| ECM (for 1KD-FTV) |
Click here
|