2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

P1630 Communication Error from VSC to ECM

Diagnostic trouble codes · Vehicles built from Aug 2013

DESCRIPTION

The skid control ECU sends signals, such as cruise control cancel demand signals and brake operation demand response signals, to the ECM when the dynamic radar cruise control system is in operation.
DTC Code
DTC Detection Condition
Trouble Area
P1630
While the vehicle speed is 50 km/h (31 mph) or more with the cruise control switch on, the skid control ECU is logically inconsistent for 1 second.
  1. Hydraulic brake booster assembly (Skid control ECU)
  2. ECM

INSPECTION PROCEDURE

NOTICE:
When the ECM is replaced with a new one, initialization must be performed (Click here).


1. REPLACE HYDRAULIC BRAKE BOOSTER ASSEMBLY (SKID CONTROL ECU)
  1. for LHD:Replace the hydraulic brake booster assembly (Click here).

  1. for RHD:Replace the hydraulic brake booster assembly (Click here).


NEXT


2. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Perform the following to make sure the DTC detection conditions are met.

    HINT:
    If the detection conditions are not met, the system cannot detect the malfunction.

    1. Drive the vehicle at a speed of 50 km/h (31 mph) or more.

    2. Turn the cruise control switch on.

  1. Check for DTCs (Click here).

    OK:
    DTC P1630 is not output.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for 1GR-FE)
    B
    NG (for 1KD-FTV)
    C



B
REPLACE ECM (Click here)

C
REPLACE ECM (Click here)
A

END (HYDRAULIC BRAKE BOOSTER ASSEMBLY [SKID CONTROL ECU] IS DEFECTIVE)


← P1617 Distance Control ECU Malfunction (from Aug 2013)P1631 Communication Error from ECM to VSC (from Aug 2013) →