Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR
RM27T0E _51 Engine / Hybrid System _053656 2TR-FE ENGINE CONTROL _0260410 CRANKSHAFT POSITION SENSOR A

2TR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301K 1.INSTALL CRANKSHAFT POSITION SENSOR

a.

Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.


b.

Install the crankshaft position sensor with the bolt.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)

NOTICE:
·

When reusing the crankshaft position sensor, inspect the O-ring.

·

Make sure that the O-ring is not cracked or jammed when installing the crankshaft position senor.




c.

Connect the crankshaft position sensor connector and attach the wire harness clamp.


Hide 88431 2.INSTALL NO. 1 COMPRESSOR MOUNTING BRACKET