11381A
1.INSTALL REAR CRANKSHAFT OIL SEAL
Apply MP grease to the lip of a new oil seal.
Keep the lip free from foreign matter.
Using SST, tap in the oil seal until its surface is flush with the engine rear oil seal retainer edge.
Wipe off any extra grease on the crankshaft.
11354
2.INSTALL FLYWHEEL HOUSING DUST SEAL
11355
3.INSTALL REAR END PLATE
13405
4.INSTALL FLYWHEEL SUB-ASSEMBLY
31250
5.INSTALL CLUTCH DISC ASSEMBLY
31210
6.INSTALL CLUTCH COVER ASSEMBLY
7.INSTALL MANUAL TRANSMISSION ASSEMBLY
Install the manual transmission (See page Drivetrain>G52F (MANUAL TRANSMISSION / TRANSAXLE)>MANUAL TRANSMISSION ASSEMBLY>INSTALLATION).