Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL
RM27T0E _51 Engine / Hybrid System _053663 2TR-FE ENGINE MECHANICAL _0260504 FRONT CRANKSHAFT OIL SEAL A

2TR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11301C 1.INSTALL TIMING CHAIN CASE OIL SEAL

a.
A354911E01
0.929,3.037 1.266,3.196 0.336,0.159 10 SST 0.704,0.514 1.041,0.673 0.336,0.159 10 SST 2.013,0.611 1.112,0.611 1.112,0.611 1.579,1.164 false 1.1,3.027 0.991,2.714 false 1.343,2.638 1.1,3.027 false

Apply MP grease to the lip of a new timing chain case oil seal.

NOTICE:
·

Do not allow foreign matter to contact the lip of the timing chain case oil seal.

·

Do not allow MP grease to contact the dust seal.




b.

Temporarily install the timing chain case oil seal to the timing chain cover sub-assembly.


c.

Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the chain cover edge.

SST
09223-75010  
09950-70010  (09951-07100)

NOTICE:
·

Keep the lip free from foreign matter.

·

Do not tap the timing chain case oil seal at an angle.




Hide 13471 2.INSTALL CRANKSHAFT PULLEY

a.
A354912E01
0.058,0.464 0.387,0.627 0.329,0.163 10 SST 0.284,1.424 0.463,1.593 0.179,0.170 10 *a 0.444,0.547 1.133,0.611 false 0.444,0.547 1.214,0.854 false

Align the key groove of the crankshaft pulley with the pulley set key and slide on the crankshaft pulley.


b.

Using SST, install a new crankshaft pulley bolt.

SST
09213-54015  (91651-60855)
09330-00021  

Torque:
260 N*m (2651 kgf*cm, 192 ft.*lbf)

Text in Illustration
*a Hold
V100135

Turn

NOTICE:

Do not reuse the pulley bolt.