Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › REAR CRANKSHAFT OIL SEAL
RM27T0E _51 Engine / Hybrid System _053663 2TR-FE ENGINE MECHANICAL _0260505 REAR CRANKSHAFT OIL SEAL A

2TR-FE ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 33030 1.REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY (for Manual Transmission)

Hide 35030 2.REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)

Hide 31210 3.REMOVE CLUTCH COVER ASSEMBLY (for Manual Transmission)

Hide 31250 4.REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission)

Hide 13405 5.REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)

a.
A354914E01
0.227,0.933 0.568,1.102 0.341,0.170 10 SST 1.168,1.017 0.63,1.017 false 0.63,1.017 1.139,1.251 false

Using SST, hold the crankshaft.

SST
09213-54015  (91651-60855)
09330-00021  


b.
A222354

Remove the 10 bolts and flywheel sub-assembly.


Hide 32101 6.REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission)

a.
A354914E01
0.227,0.933 0.568,1.102 0.341,0.170 10 SST 1.168,1.017 0.63,1.017 false 0.63,1.017 1.139,1.251 false

Using SST, hold the crankshaft.

SST
09213-54015  (91651-60855)
09330-00021  


b.
A222355

Remove the 10 bolts, rear drive plate spacer, drive plate and ring gear sub-assembly and front drive plate spacer.


Hide 11381A 7.REMOVE REAR ENGINE OIL SEAL

a.
A354916E01
2.786,1.156 2.980,1.326 0.194,0.170 10 *b 1.183,1.723 1.377,1.893 0.194,0.170 10 *a 1.158,1.813 0.955,1.813 0.955,1.813 0.659,1.544 false 2.773,1.25 2.674,1.25 2.674,1.25 1.87,0.984 false

Using a knife, cut off the lip of the rear engine oil seal.

Text in Illustration
*a Cut Position
*b Protective Tape


b.

Using a screwdriver pry out the rear engine oil seal.

NOTICE:
·

Do not damage the surface of the rear engine oil seal press fit hole or the crankshaft.

·

After removing the rear engine oil seal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.



HINT:

Tape the screwdriver tip before use.