Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL TANK › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053667 1GR-FE FUEL _0260548 FUEL TANK A

1GR-FE FUEL  FUEL TANK  INSTALLATION  


PROCEDURE

Hide 77213B 1.INSTALL FUEL TANK TO FILLER PIPE HOSE

a.
A220824E01
0.432,2.664 0.621,2.811 0.189,0.147 10 *1 0.645,2.752 0.744,2.752 0.744,2.752 1.376,3.438 false 2.247,2.798 2.436,2.945 0.189,0.147 10 *2 2.209,2.887 2.11,2.887 2.11,2.887 1.527,3.573 false

Align the fuel tank side mark with the hose side mark.

Text in Illustration
*1 Fuel Tank Side Mark
*2 Hose Side Mark


b.

Install the fuel tank to filler pipe hose to the fuel tank.


Hide 77643A 2.INSTALL NO. 3 FUEL TANK PROTECTOR

a.

Install the No. 3 fuel tank protector and attach the 4 clamps.


b.

Install the 2 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 77020A 3.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

Hide 77209D 4.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY AND FUEL RETURN TUBE SUB-ASSEMBLY (for Single Tank Type)

a.
A220829

Install the fuel tank main tube and fuel return tube with the 2 fuel tube joint clips.

NOTICE:
·
A118171E07
2.57,0.9 2.764,1.046 0.194,0.146 10 *4 2.543,0.989 1.629,0.989 false 0.231,0.553 0.425,0.699 0.194,0.146 10 *1 0.973,0.633 0.448,0.633 false 0.037,1.255 0.230,1.401 0.194,0.146 10 *2 0.973,1.335 0.253,1.335 false 0.973,1.179 0.359,1.179 0.359,1.179 0.359,1.334 false 1.971,0.033 2.165,0.179 0.194,0.146 10 *3 1.949,0.123 1.866,0.123 1.866,0.123 1.703,0.496 false 0.884,4.269 1.078,4.415 0.194,0.146 10 *a 2.56,4.269 2.754,4.415 0.194,0.146 10 *b

Check that there are no scratches or foreign objects on the connecting parts.

·

Check that the fuel tube joints are inserted securely.

·

Check that the fuel tube joint clips are on the collars of the fuel tube joints.

·

After installing the fuel tube joint clips, check that the fuel tube joints cannot be pulled off.

Text in Illustration
*1 Fuel Tube Joint
*2 O-Ring
*3 Fuel Tube
*4 Fuel Tube Joint Clip
*a CORRECT
*b INCORRECT




b.

Install the fuel tank main tube and fuel return tube to the fuel tank.


Hide 77209D 5.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY, FUEL RETURN TUBE SUB-ASSEMBLY AND NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)

a.
A220828

Install the fuel tank main tube, fuel return tube and No. 2 fuel main tube with the 3 fuel tube joint clips.

NOTICE:
·
A118171E07
2.57,0.9 2.764,1.046 0.194,0.146 10 *4 2.543,0.989 1.629,0.989 false 0.231,0.553 0.425,0.699 0.194,0.146 10 *1 0.973,0.633 0.448,0.633 false 0.037,1.255 0.230,1.401 0.194,0.146 10 *2 0.973,1.335 0.253,1.335 false 0.973,1.179 0.359,1.179 0.359,1.179 0.359,1.334 false 1.971,0.033 2.165,0.179 0.194,0.146 10 *3 1.949,0.123 1.866,0.123 1.866,0.123 1.703,0.496 false 0.884,4.269 1.078,4.415 0.194,0.146 10 *a 2.56,4.269 2.754,4.415 0.194,0.146 10 *b

Check that there are no scratches or foreign objects on the connecting parts.

·

Check that the fuel tube joints are inserted securely.

·

Check that the fuel tube joint clips are on the collars of the fuel tube joints.

·

After installing the fuel tube joint clips, check that the fuel tube joints cannot be pulled off.

Text in Illustration
*1 Fuel Tube Joint
*2 O-Ring
*3 Fuel Tube
*4 Fuel Tube Joint Clip
*a CORRECT
*b INCORRECT




b.

Install the fuel main tube and fuel return tube to the fuel tank.


c.

Install the No. 2 fuel main tube to the fuel tank and attach the clamp.


Hide 77651A 6.INSTALL FUEL TANK CUSHION

a.

Install 3 new fuel tank cushions to the fuel tank.


Hide 77100U 7.INSTALL FUEL TANK SUB-ASSEMBLY

a.

Set the fuel tank on a transmission jack and lift up the transmission jack.

NOTICE:

Do not allow the fuel tank to contact the vehicle, especially the differential.



b.

Install the 2 fuel tank bands with the 2 pins and 2 clips.


c.

Connect the 2 fuel tank bands with the 2 bolts.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


Hide 77213B 8.CONNECT FUEL TANK TO FILLER PIPE HOSE

a.

Connect the fuel tank to filler pipe hose to the filler pipe.


Hide 9.CONNECT FUEL CUT OFF TUBE (for Single Tank Type)

a.

Connect the fuel cut off tube (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 10.CONNECT FUEL CUT OFF TUBE (for Double Tank Type)

a.

Connect the fuel cut off tube (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 77012 11.CONNECT FUEL TANK BREATHER TUBE SUB-ASSEMBLY (for Single Tank Type)

a.

Connect the fuel tank breather tube (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 77012 12.CONNECT FUEL TANK BREATHER TUBE SUB-ASSEMBLY (for Double Tank Type)

a.

Connect the fuel tank breather tube (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 77206C 13.CONNECT NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)

a.

Connect the No. 2 fuel main tube (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 77207A 14.CONNECT FUEL RETURN TUBE SUB-ASSEMBLY

a.

Connect the fuel return tube (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 77209D 15.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Connect the fuel tank main tube (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 77606 16.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY

a.

Install the No. 1 fuel tank protector with the 6 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


b.

for Half Cover Type:

Install the No. 1 fuel tank protector with the 4 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 58325E 17.INSTALL REAR FLOOR SERVICE HOLE COVER

a.

Connect the fuel pump and fuel sender gauge connector.


b.

Install the rear floor service hole cover with the 3 screws.


Hide 67918D 18.INSTALL REAR DOOR SCUFF PLATE LH

Hide 67934 19.INSTALL QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

Hide 58371F 20.INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

Hide 21.INSTALL REAR SEAT ASSEMBLY LH

a.

for 60/40 Split Double-folding Seat Type LH Side:

Install the rear seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side)>INSTALLATION).


b.

for 60/40 Split Slide Walk-in Seat Type LH Side:

Install the rear seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side)>INSTALLATION).


Hide 22.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).