Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › MONOLITHIC CONVERTER (w/ DPF) › 2015.06–2018.06
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260626 MONOLITHIC CONVERTER A

1GD-FTV EMISSION CONTROL  MONOLITHIC CONVERTER  REMOVAL  


PROCEDURE

Hide 17410 2.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 17168 3.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

Hide 53736B 4.REMOVE NO. 1 FRONT FENDER APRON TO FRAME SEAL RH

Hide 17705 5.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE

Hide 17801 6.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 12633 10.REMOVE NO. 3 ENGINE COVER BRACKET

Hide 25733A 11.REMOVE NO. 1 VACUUM PIPE

a.
A352107

Remove the nut and clamp from the No. 1 vacuum pipe and No. 2 vacuum pipe.


b.
A352108

Using a 17 mm union nut wrench, remove the No. 1 vacuum pipe from the exhaust manifold converter sub-assembly.


Hide 25734 12.REMOVE NO. 2 VACUUM PIPE

a.
A352109

Using a 17 mm union nut wrench, remove the No. 2 vacuum pipe from the exhaust manifold converter sub-assembly.


b.
A358214

Remove the clamp from the pipe clamp.


Hide 17578B 13.REMOVE PIPE CLAMP

a.
A352110

Remove the 3 bolts and pipe clamp from the engine cover bracket.


Hide 12631A 14.REMOVE ENGINE COVER BRACKET

a.
A352111

Detach the 2 clamp and disconnect the engine wire from the engine cover bracket.


b.
A352112

Remove the 2 bolts and engine cover bracket from the cylinder head sub-assembly.


Hide 17167 17.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

a.
A352114

Remove the 3 bolts and No. 1 exhaust manifold heat insulator from the exhaust manifold.


Hide 17271 18.REMOVE NO. 1 TURBO INSULATOR

a.
A352115

Remove the 3 bolts and No. 1 turbo insulator from the exhaust manifold and turbocharger subassembly.


Hide 17118 19.REMOVE NO. 2 EXHAUST PIPE SUPPORT STAY

a.
A352116

Remove the bolt, 2 nuts and No. 2 exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.


Hide 17118 20.REMOVE EXHAUST PIPE SUPPORT STAY

a.
A352117

Remove the 3 bolts and exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.


Hide 25051 21.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

a.
A352118

Remove the nut, exhaust pipe clamp and exhaust manifold converter sub-assembly from the turbocharger sub-assembly.


b.

Remove the gasket.