Home › Engine / Hybrid System › 1GR-FE (COOLING) › WATER PUMP
RM27T0E _51 Engine / Hybrid System _053684 1GR-FE COOLING _0260673 WATER PUMP A

1GR-FE COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL WATER PUMP ASSEMBLY

a.
A223007E04
1.167,1.708 1.302,1.865 0.135,0.156 10 true B 2.292,1.542 2.427,1.698 0.135,0.156 10 true B 2.469,1.646 2.604,1.802 0.135,0.156 10 true B 0.354,1.844 0.49,2 0.135,0.156 10 true C 2.74,0.167 2.875,0.323 0.135,0.156 10 true B 1.531,1.865 1.667,2.021 0.135,0.156 10 true C 1.552,0.458 1.688,0.615 0.135,0.156 10 true B 2.063,1.854 2.198,2.01 0.135,0.156 10 true C 1.042,0.479 1.177,0.635 0.135,0.156 10 true B 2.698,1.74 2.833,1.896 0.135,0.156 10 true C 0.073,0.635 0.208,0.792 0.135,0.156 10 true A 0.615,0.51 0.75,0.667 0.135,0.156 10 true B 3.24,1.25 3.375,1.406 0.135,0.156 10 true C 3.094,0.573 3.229,0.729 0.135,0.156 10 true A 2.708,0.604 2.844,0.76 0.135,0.156 10 true B 1.323,0.521 1.458,0.677 0.135,0.156 10 false C 0.74,1.813 0.875,1.969 0.135,0.156 10 true C

Install a new gasket and the water pump with the 17 bolts.

Torque:
for bolt A : 47 N*m (479 kgf*cm, 35 ft.*lbf)
for bolt B : 11 N*m (112 kgf*cm, 8 ft.*lbf)
for bolt C : 23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 16620 2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

Hide 88320 3.INSTALL COOLER COMPRESSOR ASSEMBLY

a.

Hide 27020 4.INSTALL GENERATOR ASSEMBLY

Hide 44320 5.CONNECT VANE PUMP ASSEMBLY

a.

Connect the vane pump with the 2 bolts.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


b.

Attach the 2 wire harness clamps.


c.

Connect the 2 connectors.


Hide 16604 6.INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

a.

for Separate Type:

Install the 2 idler pulley cover plates, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates with the 2 bolts.

Torque:
54 N*m (551 kgf*cm, 40 ft.*lbf)


b.

for Integrated Type:

Install the 2 No. 2 idler pulleys with the 2 bolts.

Torque:
54 N*m (551 kgf*cm, 40 ft.*lbf)


Hide 16323 7.INSTALL WATER INLET HOUSING (w/o Oil Cooler)

A223008

a.

Install a new O-ring to the water outlet pipe.


b.

Install a new gasket to the water pump.


c.

Apply soapy water to the gasket of the water outlet pipe.


d.

Install the water inlet with the 5 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


e.

Connect the 5 water by-pass hoses.


f.

Connect the throttle body connector.


Hide 16323 8.INSTALL WATER INLET HOUSING (w/ Oil Cooler)

A223008

a.

Install a new O-ring to the water outlet pipe.


b.

Install a new gasket to the water pump.


c.

Apply soapy water to the gasket of the water outlet pipe.


d.

Install the water inlet with the 5 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


e.

Connect the 5 water by-pass hoses.


f.

Connect the oil cooler hose.


g.

Connect the No. 2 oil cooler hose.


h.

Connect the throttle body connector.


Hide 17360 9.CONNECT AIR TUBE ASSEMBLY (w/o Oil Cooler)

a.

Connect the air tube with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 32907C 11.CONNECT OIL COOLER TUBE (w/ Air Cooled Transmission Oil Cooler)

Hide 32907C 12.CONNECT OIL COOLER TUBE (w/ Warmer)

Hide 51405A 19.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY