Home › Engine / Hybrid System › 5L-E (LUBRICATION) › OIL PRESSURE SWITCH
RM27T0E _51 Engine / Hybrid System _053688 5L-E LUBRICATION _0260694 OIL PRESSURE SWITCH A

5L-E LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Clean the threads of the oil pressure switch and apply adhesive to them.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent


NOTICE:

Do not apply adhesive to the oil inlet port of the oil pressure switch.



b.

Using a 24 mm deep socket wrench, install the oil pressure switch.

Torque:
15 N*m (150 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine within 1 hour of installation.



Hide 11452 3.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 4.INSTALL RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY