Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE
RM27T0E _52 Drivetrain _053698 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0260778 TRANSMISSION CONTROL CABLE A

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  INSTALLATION  


PROCEDURE

Hide 33820B 1.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Install the transmission control cable from outside the vehicle body and attach the 3 claws of the cable retainer.


b.

Install the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

for 1GR-FE, 1GD-FTV:

i.

Connect the transmission control cable support to the vehicle body with the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)



d.

for 2TR-FE:

i.
U148471E02
1.354,0.896 0.865,0.427 0.865,0.427 0.781,0.427 true 0.604,0.354 0.802,0.542 0.198,0.188 10 false *1 1.823,0.167 1.958,0.323 0.135,0.156 10 false A 1.208,0.125 1.344,0.281 0.135,0.156 10 false B

Connect the transmission control cable support and ground wire to the vehicle body with the 2 nuts as shown in the illustration.

Torque:
for Nut A : 5.5 N*m (56 kgf*cm, 49 in.*lbf)
for Nut B : 10 N*m (102 kgf*cm, 7 ft.*lbf)

Text in Illustration
*1 Ground Wire



e.
C326305E06
1.01,0.042 1.208,0.229 0.198,0.188 10 true N

Turn the control shaft lever LH clockwise until it stops, and then return the control shaft lever counterclockwise 2 notches to N.


f.

Connect the transmission control cable assembly to the transmission control cable bracket with a new clip, and then connect the cable end to the control shaft lever LH with the nut.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY