Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › OIL COOLER (for 1GD-FTV)
RM27T0E _52 Drivetrain _053698 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0260783 OIL COOLER(for 1GD-FTV) A

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  OIL COOLER(for 1GD-FTV)  REMOVAL  


PROCEDURE

Hide 51405A 1.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 51450 2.REMOVE REAR ENGINE UNDER COVER ASSEMBLY

Hide 17410 3.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 32921 4.REMOVE NO. 1 OIL COOLER INLET TUBE AND NO. 1 OIL COOLER OUTLET TUBE

NOTICE:

When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.


HINT:

Use a container to catch any ATF.


a.
C324534

Disconnect the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube from the automatic transmission assembly.


b.
C330326

Slide the 2 clips and disconnect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube.


c.

Remove the bolt and flexible hose clamp from the automatic transmission assembly.

C330327E02
2,0.875 1.906,1.146 1.906,1.146 1.813,1.146 true 5.708,2.094 5.625,2.302 5.625,2.302 5.542,2.302 true 4.667,1.01 4.76,1.302 4.76,1.302 4.823,1.302 true 1.646,1.073 1.802,1.25 0.156,0.177 10 false *1 4.854,1.219 5.031,1.396 0.177,0.177 10 true *2 5.354,2.229 5.521,2.417 0.167,0.188 10 true *2

Text in Illustration
*1 Flexible Hose Clamp *2 Oil Cooler Tube Clamp


d.

Remove the 2 bolts to open the 2 oil cooler tube clamps and remove the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube.


e.

Remove the 2 bolts and 2 oil cooler tube clamps from the engine assembly.


Hide 5.REMOVE OIL COOLER HOSE

NOTICE:

When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.


HINT:

Use a container to catch any ATF.


a.
C332184E02
2.688,2.177 2.844,1.854 2.844,1.854 2.917,1.854 true 2.948,1.76 3.104,1.938 0.156,0.177 10 false *1

Detach the claw to open the No. 1 flexible hose clamp.

Text in Illustration
*1 No. 1 Flexible Hose Clamp


b.

Slide the clip and remove the No. 1 oil cooler inlet hose from the radiator.


c.

Slide the clip and remove the No. 1 oil cooler inlet hose from the oil cooler tube sub-assembly.


d.

Detach the clamp, slide the 2 clips and remove the No. 1 transmission oil cooler hose from the radiator and oil cooler tube sub-assembly.


Hide 32907C 6.REMOVE OIL COOLER TUBE SUB-ASSEMBLY

a.
C332138

Remove the bolt and oil cooler tube sub-assembly from the fan shroud.