Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type)
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260967 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  Speaker Circuit  


DESCRIPTION

The sound signals amplified by the radio receiver assembly are sent to the speakers from the radio receiver assembly via the speaker circuit.

If there is a short in a speaker circuit, the radio receiver assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is not a malfunction in the radio receiver assembly or speakers.

WIRING DIAGRAM

C240170E45
5.708,6.573 6.958,7.073 1.25,0.5 10 false Radio and Display Receiver Assembly 5.875,3.083 6.302,3.385 0.427,0.302 10 false FL- 5.875,2.573 6.281,2.896 0.406,0.323 10 false FL+ 5.51,3.083 5.813,3.271 0.302,0.188 10 false G5 5.51,2.563 5.792,2.729 0.281,0.167 10 false G5 5.875,1.688 6.396,2.021 0.521,0.333 10 false FR- 5.875,1.167 6.375,1.479 0.5,0.313 10 false FR+ 5.51,1.688 5.813,1.906 0.302,0.219 10 false G5 5.51,1.167 5.896,1.469 0.385,0.302 10 false G5 2.948,2.094 5.385,2.385 2.438,0.292 10 false Front No. 2 Speaker Assembly RH 2.948,3.5 5.24,3.698 2.292,0.198 10 false Front No. 2 Speaker Assembly LH 0.729,1.323 2.01,1.729 1.281,0.406 10 false Front No. 1 Speaker Assembly RH 0.729,2.729 2.01,3.167 1.281,0.438 10 false Front No. 1 Speaker Assembly LH 5.563,0.958 5.688,1.125 0.125,0.167 10 false 1 5.563,1.469 5.688,1.635 0.125,0.167 10 false 5 5.563,2.344 5.688,2.51 0.125,0.167 10 false 2 5.563,2.865 5.688,3.031 0.125,0.167 10 false 6 4.344,1.073 4.469,1.24 0.125,0.167 10 false 4 4.344,1.583 4.469,1.75 0.125,0.167 10 false 2 3.896,1.073 4.365,1.24 0.469,0.167 10 false TWR+ 3.927,1.792 4.333,1.958 0.406,0.167 10 false TWR- 3.51,1.073 3.635,1.24 0.125,0.167 10 false 3 3.51,1.583 3.635,1.75 0.125,0.167 10 false 1 3.698,1.083 3.823,1.25 0.125,0.167 10 false + 3.698,1.76 3.823,1.927 0.125,0.167 10 false - 3.896,2.469 4.365,2.635 0.469,0.167 10 false TWL+ 3.927,3.188 4.333,3.354 0.406,0.167 10 false TWL- 3.688,2.479 3.813,2.646 0.125,0.167 10 false + 3.688,3.156 3.813,3.323 0.125,0.167 10 false - 4.344,2.469 4.469,2.635 0.125,0.167 10 false 4 4.344,2.979 4.469,3.146 0.125,0.167 10 false 2 3.51,2.469 3.635,2.635 0.125,0.167 10 false 3 3.51,2.979 3.635,3.146 0.125,0.167 10 false 1 2.313,1.573 2.438,1.74 0.125,0.167 10 false 2 2.313,1.302 2.438,1.469 0.125,0.167 10 false 1 2.313,2.969 2.438,3.135 0.125,0.167 10 false 2 2.313,2.719 2.438,2.885 0.125,0.167 10 false 1 5.875,5.885 6.333,6.135 0.458,0.25 10 false RL- 5.875,5.365 6.354,5.625 0.479,0.26 10 false RL+ 5.521,5.865 5.885,6.125 0.365,0.26 10 false G4 5.51,5.354 5.948,5.594 0.438,0.24 10 false G4 5.875,4.49 6.292,4.74 0.417,0.25 10 false RR- 5.875,3.969 6.281,4.26 0.406,0.292 10 false RR+ 5.51,4.479 5.865,4.698 0.354,0.219 10 false G4 5.51,3.958 5.844,4.177 0.333,0.219 10 false G4 5.563,3.729 5.688,3.896 0.125,0.167 10 false 1 5.563,4.26 5.688,4.427 0.125,0.167 10 false 3 5.573,5.135 5.698,5.302 0.125,0.167 10 false 2 5.573,5.646 5.698,5.813 0.125,0.167 10 false 6 0.729,4.115 1.656,4.604 0.927,0.49 10 false Rear Speaker Assembly RH 0.729,5.51 1.646,6.073 0.917,0.563 10 false Rear Speaker Assembly LH 2.313,5.5 2.438,5.667 0.125,0.167 10 false 1 2.313,5.75 2.438,5.917 0.125,0.167 10 false 2 2.313,4.083 2.438,4.25 0.125,0.167 10 false 1 2.313,4.354 2.438,4.521 0.125,0.167 10 false 2 2.948,1.958 3.26,2.125 0.313,0.167 10 false H6 2.948,3.354 3.26,3.521 0.313,0.167 10 false I6 0.729,1.156 1.042,1.323 0.313,0.167 10 false H4 0.729,2.563 1.042,2.729 0.313,0.167 10 false I1 0.729,3.948 1.042,4.115 0.313,0.167 10 false J7 0.729,5.354 1.042,5.521 0.313,0.167 10 false J3

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

*1: for RH Side

*2: for LH Side


a.

Disconnect the H27 and H46 radio receiver assembly connectors.


b.

Disconnect the J4*1 and/or K3*2 front No. 1 speaker assembly connector.


c.

Disconnect the H34*1 and/or H35*2 front No. 2 speaker assembly connector.


d.

for 3 Door:

Disconnect the Q32*1 and/or R37*2 rear speaker set connector.


e.

for 5 Door:

Disconnect the L1*1 and/or M1*2 rear speaker set connector.

Standard Resistance:
for 3 Door (RH Side)
Tester Connection Condition Specified Condition
H46-1 (FR+) - H34-3 (TWR+) Always Below 1 Ω
H46-5 (FR-) - H34-1 (TWR-) Always Below 1 Ω
H34-4 (+) - J4-1 Always Below 1 Ω
H34-2 (-) - J4-2 Always Below 1 Ω
H27-1 (RR+) - Q32-1 Always Below 1 Ω
H27-3 (RR-) - Q32-2 Always Below 1 Ω
H46-1 (FR+) - Body ground Always 10 kΩ or higher
H46-5 (FR-) - Body ground Always 10 kΩ or higher
H34-4 (+) - Body ground Always 10 kΩ or higher
H34-2 (-) - Body ground Always 10 kΩ or higher
H27-1 (RR+) - Body ground Always 10 kΩ or higher
H27-3 (RR-) - Body ground Always 10 kΩ or higher

for 3 Door (LH Side)
Tester Connection Condition Specified Condition
H46-2 (FL+) - H35-3 (TWL+) Always Below 1 Ω
H46-6 (FL-) - H35-1 (TWL-) Always Below 1 Ω
H35-4 (+) - K3-1 Always Below 1 Ω
H35-2 (-) - K3-2 Always Below 1 Ω
H27-2 (RL+) - R37-1 Always Below 1 Ω
H27-6 (RL-) - R37-2 Always Below 1 Ω
H46-2 (FL+) - Body ground Always 10 kΩ or higher
H46-6 (FL-) - Body ground Always 10 kΩ or higher
H35-4 (+) - Body ground Always 10 kΩ or higher
H35-2 (-) - Body ground Always 10 kΩ or higher
H27-2 (RL+) - Body ground Always 10 kΩ or higher
H27-6 (RL-) - Body ground Always 10 kΩ or higher

for 5 Door (RH Side)
Tester Connection Condition Specified Condition
H46-1 (FR+) - H34-3 (TWR+) Always Below 1 Ω
H46-5 (FR-) - H34-1 (TWR-) Always Below 1 Ω
H34-4 (+) - J4-1 Always Below 1 Ω
H34-2 (-) - J4-2 Always Below 1 Ω
H27-1 (RR+) - L1-1 Always Below 1 Ω
H27-3 (RR-) - L1-2 Always Below 1 Ω
H46-1 (FR+) - Body ground Always 10 kΩ or higher
H46-5 (FR-) - Body ground Always 10 kΩ or higher
H34-4 (+) - Body ground Always 10 kΩ or higher
H34-2 (-) - Body ground Always 10 kΩ or higher
H27-1 (RR+) - Body ground Always 10 kΩ or higher
H27-3 (RR-) - Body ground Always 10 kΩ or higher

for 5 Door (LH Side)
Tester Connection Condition Specified Condition
H46-2 (FL+) - H35-3 (TWL+) Always Below 1 Ω
H46-6 (FL-) - H35-1 (TWL-) Always Below 1 Ω
H35-4 (+) - K3-1 Always Below 1 Ω
H35-2 (-) - K3-2 Always Below 1 Ω
H27-2 (RL+) - M1-1 Always Below 1 Ω
H27-6 (RL-) - M1-2 Always Below 1 Ω
H46-2 (FL+) - Body ground Always 10 kΩ or higher
H46-6 (FL-) - Body ground Always 10 kΩ or higher
H35-4 (+) - Body ground Always 10 kΩ or higher
H35-2 (-) - Body ground Always 10 kΩ or higher
H27-2 (RL+) - Body ground Always 10 kΩ or higher
H27-6 (RL-) - Body ground Always 10 kΩ or higher




OK

2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly LH and/or RH (See page Audio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL).


b.

Inspect the front No. 1 speaker assembly LH and/or RH (See page Audio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION).



OK

3.CHECK FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

3.CHECK FRONT NO. 2 SPEAKER ASSEMBLY
a.

Replace the front No. 2 speaker LH and/or RH with a known good one (See page Audio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL).


b.

Check that the malfunction disappears.

HINT:
·

Connect all the connectors that were disconnected from the front No. 2 speaker assemblies.

·

When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both LH and RH sides.



OK:

Malfunction disappears.




OK

END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

NG

4.INSPECT REAR SPEAKER SET
4.INSPECT REAR SPEAKER SET
a.

Remove the rear speaker set LH and/or RH (Audio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL).


b.

Inspect the rear speaker set LH and/or RH (Audio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION).



OK

NG