A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
85970A
1.INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY
Install the double door lock control relay assembly with the nut.
Connect the connector.
55550
2.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
55607
3.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55461A
4.INSTALL INSTRUMENT PANEL ORNAMENT
55317A
5.INSTALL INSTRUMENT SIDE PANEL RH
62111C
6.INSTALL COWL SIDE TRIM BOARD RH
67910
7.INSTALL DOOR SCUFF PLATE ASSEMBLY RH