Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84160
1.INSTALL ROOM LIGHT SWITCH ASSEMBLY (for LHD)
Attach the 2 claws to install the switch.
84160
2.INSTALL ROOM LIGHT SWITCH ASSEMBLY (for RHD)
Attach the 2 claws to install the switch.
55045
3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
55480D
4.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
55476C
5.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)
55471A
6.INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)
55318C
7.INSTALL INSTRUMENT SIDE PANEL LH (for LHD)
55317A
8.INSTALL INSTRUMENT SIDE PANEL RH (for RHD)
55606
9.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62112
10.INSTALL COWL SIDE TRIM BOARD LH (for LHD)
62111C
11.INSTALL COWL SIDE TRIM BOARD RH (for RHD)
67920
12.INSTALL DOOR SCUFF PLATE ASSEMBLY LH (for LHD)
67910
13.INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)