Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CURTAIN SHIELD AIRBAG ASSEMBLY › 2015.06–2020.08
RM27T0E _58 Vehicle Interior _053735 SUPPLEMENTAL RESTRAINT SYSTEMS _0261089 CURTAIN SHIELD AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  CURTAIN SHIELD AIRBAG ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 62180A 1.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)

a.

Check that the ignition switch is off.


b.

Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



c.

Install the curtain shield airbag with the 17 new bolts.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)

NOTICE:

Do not twist the curtain shield airbag when installing it.



d.

Connect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.



Hide 62180A 2.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)

a.

Install the curtain shield airbag with the 13 new bolts.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)

NOTICE:

Do not twist the curtain shield airbag when installing it.



b.

Connect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.



Hide 62180A 3.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for 3 Door)

a.

Install the curtain shield airbag with the 11 new bolts.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)

NOTICE:

Do not twist the curtain shield airbag when installing it.



b.
B241936

Connect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.



Hide 66425A 4.INSTALL REAR NO. 2 SIDE RAIL SPACER LH (for 3 Door)

Hide 87217D 5.INSTALL NO. 1 AIR DUCT REAR SIDE (w/ Rear Cooler)

Hide 87217E 6.INSTALL NO. 2 AIR DUCT REAR SIDE (w/ Rear Cooler)

Hide 63310 7.INSTALL ROOF HEADLINING ASSEMBLY

a.

for 5 Door:



b.

for 3 Door: