Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Walk in Seat Type)
RM27T0E _58 Vehicle Interior _053737 SEAT _0261132 FRONT SEAT ASSEMBLY(for Walk in Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Walk in Seat Type)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the RH side.



PROCEDURE

Hide 72525B 1.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

B241192E01
1.933,0.097 2.091,0.251 0.158,0.154 10 *1 1.912,0.195 1.829,0.195 false 1.829,0.195 1.529,0.697 false

a.

Raise the reclining adjuster release handle to reveal the claw. Using a screwdriver, detach the claw and remove the handle.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 71811D 2.REMOVE FRONT SEAT CUSHION SHIELD RH

B241194

a.

Remove the screw.


b.

Using a moulding remover, detach the 5 claws and 2 clips.


c.

Detach the cable clamp and remove the cushion shield.


Hide 71861 3.REMOVE FRONT SEAT INNER CUSHION SHIELD RH

B241195

a.

Using a moulding remover, detach the 5 claws and remove the cushion shield.


Hide 73230 4.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

Hide 71430S 5.REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

a.
B241196

Remove the rubber band from the seat cushion spring.


b.
B242236

w/ Seat Heater System:

Disconnect the seat heater connector and detach the wire harness clamp.


c.
B241198E01
1.817,2.955 1.997,3.134 0.179,0.179 10 *1 2.018,3.028 2.11,3.028 false 2.11,3.028 2.375,2.536 false

w/ Front Seat Side Airbag:

i.

Detach the claw and disconnect the airbag connector.


ii.

Detach the 4 airbag wire harness clamps.


iii.

Detach the fastening tape and open the cover.

Text in Illustration
*1 Fastening Tape


iv.

Disconnect the airbag wire harness.



d.
B241200

Detach the hook.


e.
B241199

Detach the cable clamp and disconnect the cable from the seatback.


f.
B241201

Remove the 4 bolts and seatback assembly.


Hide 62476E 6.REMOVE CAP

B239234

a.

Remove the 2 caps.


Hide 7.REMOVE SEAT CUSHION COVER WITH PAD

a.
B241202

Using a clip remover, remove the clip.


b.
B239243

w/ Seat Heater System:

Disconnect the seat heater connector and detach the 3 wire harness clamps.


c.

Detach the hooks.


d.
B239181

Detach the claw and disconnect the connector.


e.

Remove the seat cushion cover with pad.


Hide 71071S 8.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

B239182

a.

Remove the hog rings and seat cushion cover from the seat cushion pad.


Hide 87510K 9.REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH (w/ Seat Heater System)

Hide 71537D 10.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH

B241203E01
0.709,0.58 0.900,0.757 0.191,0.176 10 *1 0.939,1.789 1.129,1.966 0.191,0.176 10 *2 0.925,0.668 1.012,0.668 false 1.26,1.875 1.154,1.875 false 1.012,0.668 1.528,0.937 false 2.228,0.702 1.26,1.875 false 1.26,1.875 1.807,1.565 false

a.

Remove the screw.


b.

Move the protector in the direction of the arrow to detach the hook and 2 guides and remove the protector.

Text in Illustration
*1 Hook
*2 Guide


Hide 71537C 11.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH

B241205E01
2.773,0.668 2.977,0.850 0.204,0.182 10 *1 1.475,0.097 1.679,0.278 0.204,0.182 10 *2 1.474,0.189 1.388,0.189 false 1.388,0.189 1.275,0.787 false 2.766,0.768 2.689,0.768 false 2.689,0.768 1.936,1.099 false

a.

Remove the screw.


b.

Using a clip remover, detach the clip.


c.

Move the protector in the direction of the arrow to detach the hook and guide and remove the protector.

Text in Illustration
*1 Hook
*2 Guide


Hide 87501A 12.REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY RH (w/ Seat Heater System)

Hide 82191 13.REMOVE FRONT SEAT WIRE RH

a.

Remove the seat wire.


Hide 71876C 14.REMOVE RECLINING ADJUSTER INSIDE COVER LH

B239256

a.

Detach the guide.


b.

Move the cover in the direction of the arrow to remove it.


Hide 71875K 15.REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 71073S 16.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B242237

Remove the 3 hog rings.


b.

Open the 2 fasteners, and then open the seatback cover.

B242232E01
0.93,0.011 1.160,0.204 0.230,0.193 10 *A 4.37,0.011 4.600,0.204 0.230,0.193 10 *B

Text in Illustration
*A for Cloth Seat *B for Leather Seat


c.
B239254

w/ Front Seat Side Airbag:

i.

Remove the nut and seatback cover bracket from the seat frame.


ii.

Disconnect the seatback cover bracket from the seatback pad.



d.
B239198

Using a screwdriver, detach the 4 claws and remove the 2 headrest supports.


e.

Remove the hog rings and seatback cover.

HINT:

The number of hog rings differs according to seat type.


B242230E01
0.897,0.043 1.131,0.217 0.233,0.173 10 *A 4.031,0.043 4.265,0.217 0.233,0.173 10 *B

Text in Illustration
*A for Type A *B for Type B


Hide 87510M 17.REMOVE FRONT SEATBACK HEATER ASSEMBLY RH (w/ Seat Heater System)

Hide 71551S 18.REMOVE SEPARATE TYPE FRONT SEATBACK PAD

a.

Remove the seatback pad.


Hide 72991 19.REMOVE FRONT SEAT CUSHION COVER RH

B241207

a.

Remove the screw and cover.


Hide 71873 20.REMOVE FRONT SEAT LOWER CUSHION SHIELD RH

B241208

a.

Remove the screw and cushion shield.


Hide 21.REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)