Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER › 2015.06–2016.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261183 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REMOVAL  


PROCEDURE

Hide 1. DRAIN ENGINE COOLANT

a.

for 1GR-FE:

Drain the engine coolant (See page Engine / Hybrid System>1GR-FE (COOLING)>COOLANT>REPLACEMENT).


b.

for 2TR-FE:

Drain the engine coolant (See page Engine / Hybrid System>2TR-FE (COOLING)>COOLANT>REPLACEMENT).


c.

for 1KD-FTV:

Drain the engine coolant (See page Engine / Hybrid System>1KD-FTV (COOLING)>COOLANT>REPLACEMENT).


d.

for 5L-E:

Drain the engine coolant (See page Engine / Hybrid System>5L-E (COOLING)>COOLANT>REPLACEMENT).


e.

for 1GD-FTV:

Drain the engine coolant (See page Engine / Hybrid System>1GD-FTV (COOLING)>COOLANT>REPLACEMENT).


Hide 16400 2.REMOVE RADIATOR ASSEMBLY

a.

for 1GR-FE:

Remove the radiator assembly (See page Engine / Hybrid System>1GR-FE (COOLING)>RADIATOR>REMOVAL).


b.

for 2TR-FE:

Remove the radiator assembly (See page Engine / Hybrid System>2TR-FE (COOLING)>RADIATOR>REMOVAL).


c.

for 1KD-FTV:

Remove the radiator assembly (See page Engine / Hybrid System>1KD-FTV (COOLING)>RADIATOR>REMOVAL).


d.

for 5L-E:

Remove the radiator assembly (See page Engine / Hybrid System>5L-E (COOLING)>RADIATOR>REMOVAL).


e.

for 1GD-FTV:

Remove the radiator assembly (See page Engine / Hybrid System>1GD-FTV (COOLING)>RADIATOR>REMOVAL).


Hide 3.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 88703 4.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

a.
E349926E01
0.146,0.052 0.458,0.25 0.313,0.198 10 false *A 0.146,1.625 0.49,1.927 0.344,0.302 10 false *B 0.146,3.219 0.49,3.5 0.344,0.281 10 false *C

Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.

Text in Illustration
*A for 1GR-FE
*B for 2TR-FE, for 1GD-FTV
*C for 1KD-FTV, for 5L-E

NOTICE:
·

When removing the bolt, do not allow any tools to contact the pipe.

·

When removing the bolt, hold a part of the pipe near the connector.




b.

Remove the O-ring from the discharge hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88710 5.DISCONNECT AIR CONDITIONING TUBE ASSEMBLY

a.
E349927

Remove the bolt and disconnect the air conditioning tube assembly from the cooler condenser assembly.

NOTICE:
·

When removing the bolt, do not allow any tools to contact the pipe.

·

When removing the bolt, hold a part of the pipe near the connector.




b.

Remove the O-ring from the air conditioning tube assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88463 6.DISCONNECT NO. 1 COOLER CONDENSER BRACKET

a.
E349939

Remove the bolt and disconnect the No. 1 cooler condenser bracket.


Hide 88463A 7.DISCONNECT NO. 2 COOLER CONDENSER BRACKET

a.
E199360

Remove the bolt and disconnect the No. 2 cooler condenser bracket.


Hide 88460 8.REMOVE COOLER CONDENSER ASSEMBLY

a.
E199367

Remove the 3 bolts and cooler condenser assembly as shown in the illustration.


Hide 9.REMOVE COOLER DRYER

a.
I030086

Using a 14 mm socket hexagon wrench, remove the cap from the modulator.


b.
I032475

Remove the O-ring from the cap.


c.
E050386

Using pliers, remove the cooler dryer.