1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
2.REMOVE FRONT SEAT ASSEMBLY
for Manual Seat:
Remove the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>REMOVAL).
for Power Seat:
Remove the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>REMOVAL).
for Walk in Seat Type:
Remove the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Walk in Seat Type)>REMOVAL).
84010A
3.REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
55436A
4.REMOVE INSTRUMENT PANEL FINISH PANEL END LH
55449C
5.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
55435A
6.REMOVE INSTRUMENT PANEL FINISH PANEL END RH
55448A
7.REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
58831A
8.REMOVE FRONT CONSOLE UPPER PANEL GARNISH (for Manual Transmission)
58831A
9.REMOVE FRONT CONSOLE UPPER PANEL GARNISH (for Automatic Transmission)
55606
10.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
58816B
11.REMOVE FRONT NO. 1 CONSOLE BOX INSERT
55607
12.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
58817A
13.REMOVE FRONT NO. 2 CONSOLE BOX INSERT
33504F
14.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
for Automatic Transmission:
Remove the shift lever knob sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>REMOVAL).
for Manual Transmission:
Remove the shift lever knob sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>REMOVAL).
15.REMOVE CONSOLE PANEL SUB-ASSEMBLY
for Automatic Transmission:
Remove the console panel sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>REMOVAL).
for Manual Transmission:
Remove the console panel sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>REMOVAL).
58861B
16.REMOVE NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)
88529
17.REMOVE COOLING BOX TRAY
Remove the cooling box tray.
58903A
18.REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
Detach the 8 claws.
Disconnect the connector and remove the rear console end panel sub-assembly.
58533A
19.REMOVE CENTER FLOOR CARPET COVER RH
Detach the 3 claws and remove the center floor carpet cover RH.
| *1 | Fastener |
58810J
20.REMOVE CONSOLE BOX ASSEMBLY
Remove the clip.
Remove the 7 bolts and 2 screws.
Remove the 2 bolts and disconnect the 2 cooler pipes.
Disconnect the drain cooler hose.
Disconnect the connector and remove the console box assembly.