1. DRAIN ENGINE COOLANT
for 1GR-FE:
Drain the engine coolant (See page Engine / Hybrid System>1GR-FE (COOLING)>COOLANT>REPLACEMENT).
for 2TR-FE:
Drain the engine coolant (See page Engine / Hybrid System>2TR-FE (COOLING)>COOLANT>REPLACEMENT).
for 1KD-FTV:
Drain the engine coolant (See page Engine / Hybrid System>1KD-FTV (COOLING)>COOLANT>REPLACEMENT).
for 5L-E:
Drain the engine coolant (See page Engine / Hybrid System>5L-E (COOLING)>COOLANT>REPLACEMENT).
for 1GD-FTV:
Drain the engine coolant (See page Engine / Hybrid System>1GD-FTV (COOLING)>COOLANT>REPLACEMENT).
16400
2.REMOVE RADIATOR ASSEMBLY
for 1GR-FE:
Remove the radiator assembly (See page Engine / Hybrid System>1GR-FE (COOLING)>RADIATOR>REMOVAL).
for 2TR-FE:
Remove the radiator assembly (See page Engine / Hybrid System>2TR-FE (COOLING)>RADIATOR>REMOVAL).
for 1KD-FTV:
Remove the radiator assembly (See page Engine / Hybrid System>1KD-FTV (COOLING)>RADIATOR>REMOVAL).
for 5L-E:
Remove the radiator assembly (See page Engine / Hybrid System>5L-E (COOLING)>RADIATOR>REMOVAL).
for 1GD-FTV:
Remove the radiator assembly (See page Engine / Hybrid System>1GD-FTV (COOLING)>RADIATOR>REMOVAL).
3.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
for HFC-134a (R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf (R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFO-1234yf(R1234yf))>REPLACEMENT
88703
4.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.
| *A | for 1GR-FE |
| *B | for 2TR-FE, for 1GD-FTV |
| *C | for 1KD-FTV, for 5L-E |
When removing the bolt, do not allow any tools to contact the pipe.
When removing the bolt, hold a part of the pipe near the connector.
Remove the O-ring from the discharge hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88710
5.DISCONNECT AIR CONDITIONING TUBE ASSEMBLY
Remove the bolt and disconnect the air conditioning tube assembly from the cooler condenser assembly.
When removing the bolt, do not allow any tools to contact the pipe.
When removing the bolt, hold a part of the pipe near the connector.
Remove the O-ring from the air conditioning tube assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88463
6.DISCONNECT NO. 1 COOLER CONDENSER BRACKET
Remove the bolt and disconnect the No. 1 cooler condenser bracket.
88463A
7.DISCONNECT NO. 2 COOLER CONDENSER BRACKET
Remove the bolt and disconnect the No. 2 cooler condenser bracket.
88460
8.REMOVE COOLER CONDENSER ASSEMBLY
Remove the 3 bolts and cooler condenser assembly as shown in the illustration.
9.REMOVE COOLER DRYER
Using a 14 mm socket hexagon wrench, remove the cap from the modulator.
Remove the O-ring from the cap.
Using pliers, remove the cooler dryer.