Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for 5 Door) › from 2017.08
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261150 REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for 5 Door) A

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for 5 Door)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 73200A 1.INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

a.
B239046

Align the claw with the anchor plate positioning hole, and install the front shoulder belt anchor adjuster assembly with the 2 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

HINT:

First install the lower bolt, and then install the upper bolt.



Hide 73370C 2.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

U148023N01
1.385,1.531 2.542,1.073 2.542,1.073 1.76,1.615 true 2.302,0.406 2.49,0.604 0.188,0.198 10 true A 0.771,1.927 0.958,2.135 0.188,0.208 10 true B 2.583,0.927 2.75,1.125 0.167,0.198 10 false a

NOTICE:

When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.


a.

Align the seat belt retractor positioning holes with the claws of the vehicle.


b.

Install the rear No. 1 seat outer belt assembly LH with the 2 bolts.

HINT:

First install bolt A, and then install bolt B.


Torque:
for bolt A : 8.5 N*m (87 kgf*cm, 75 in.*lbf)
for bolt B : 42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

Install the shoulder anchor of the rear No. 1 seat outer belt assembly LH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 72602B 3.INSTALL REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)

Hide 62520P 4.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

Hide 64740C 5.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

a.

w/o Rear No. 2 Seat, w/o Rear Air Conditioning System:

i.

Pass the rear seatback lock control lever base through the deck trim side panel assembly LH.


ii.

Attach the 5 clips and 8 claws to install the deck trim side panel assembly LH.


iii.

Install the 4 bolts and 2 screws.


iv.

Attach the 6 claws and 2 guides to install the rear seatback lock control lever base to the deck trim side panel assembly LH.


v.

Install the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



b.

w/o Rear No. 2 Seat, w/ Rear Air Conditioning System:

i.

Attach the 5 clips and 8 claws to install the deck trim side panel assembly LH.


ii.

Install the 2 bolts and 2 screws.


iii.

Install the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



c.

w/ Rear No. 2 Seat:

i.

Attach the 4 clips and 8 claws to install the deck trim side panel assembly LH.


ii.

Install the 2 bolts and 2 screws.


iii.

Install the floor anchor of the rear No. 2 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


iv.

Install the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



Hide 74603C 6.INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

Hide 74617A 7.INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

Hide 64712F 8.INSTALL FRONT DECK SIDE TRIM COVER LH (w/ Tonneau Cover)

Hide 64937A 9.INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

Hide 64725D 10.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 73233A 11.INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

Hide 58570C 12.INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

Hide 57412C 13.INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

Hide 57411D 14.INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

Hide 58574A 15.INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

Hide 58401A 16.INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

Hide 64717A 17.INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

Hide 64910M 18.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Hide 62332C 19.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 67934 21.INSTALL INSIDE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

Hide 58371F 22.INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

Hide 23.INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)

Hide 24.INSTALL REAR SEAT ASSEMBLY LH (for 60/40 Split Slide Walk-in Seat Type LH Side)

Hide 25.INSTALL REAR NO. 2 SEAT ASSEMBLY LH

a.

for Manual Seat Type:

Install the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side)>INSTALLATION).


b.

for Power Seat Type:

Install the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side)>INSTALLATION).


c.

for Face to Face Seat Type:

Install the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type)>INSTALLATION).