A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
85970A
1.INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY
w/o Telematics Transceiver:
Install the double door lock control relay assembly with the nut.
Connect the connector.
w/ Telematics Transceiver:
Connect the connector.
Install the double door lock control relay assembly with the nut.
55550
2.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
55607
3.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55461A
4.INSTALL INSTRUMENT PANEL ORNAMENT
55317A
5.INSTALL INSTRUMENT SIDE PANEL RH
62111C
6.INSTALL COWL SIDE TRIM BOARD RH
67910
7.INSTALL DOOR SCUFF PLATE ASSEMBLY RH