Home › Drivetrain › VF4BM (TRANSFER / 4WD / AWD) › TRANSFER SYSTEM › 2017.08–2020.08
RM27T0E _52 Drivetrain _053703 VF4BM TRANSFER / 4WD / AWD _0260838 TRANSFER SYSTEM J

VF4BM TRANSFER / 4WD / AWD  TRANSFER SYSTEM  Center Differential Lock Switch Circuit  


WIRING DIAGRAM

C346661E04
0.469,2.792 3.219,3.156 2.75,0.365 10 false Center Differential Lock Switch (Combination Switch Assembly)*1*3 0.51,1.208 2.677,1.406 2.167,0.198 10 false Center Differential Lock Switch*2*4 0.479,2.563 0.875,2.75 0.396,0.188 10 false G156 2.5,2.167 2.896,2.417 0.396,0.25 10 false 3 0.677,2.198 0.917,2.385 0.24,0.188 10 false 24 2.073,0.552 2.469,0.729 0.396,0.177 10 false CPU 0.521,1.052 0.948,1.219 0.427,0.167 10 false G230 3.5,3 3.823,3.188 0.323,0.188 10 false G53 3.521,3.167 5.344,3.385 1.823,0.219 10 false 4 Wheel Drive Control ECU 3.354,2.177 3.646,2.323 0.292,0.146 10 false 6 3.729,2.156 4.031,2.365 0.302,0.208 10 false DL 4.417,1.271 4.677,1.469 0.26,0.198 10 false IG 3.01,4.292 5.042,4.5 2.031,0.208 10 false *3: for Automatic Transmission 5.104,4.292 7.094,4.5 1.99,0.208 10 false *4: for Manual Transmission 0.719,0.552 0.885,0.771 0.167,0.219 10 false 2 2.448,0.552 2.844,0.802 0.396,0.25 10 false 5 2.094,2.188 2.49,2.365 0.396,0.177 10 false CPU 0.927,2.208 1.229,2.417 0.302,0.208 10 false E 0.917,0.552 1.219,0.76 0.302,0.208 10 false L 0.865,4.198 2.792,4.438 1.927,0.24 10 false : CAN Communication Line 5.75,3.073 6.969,3.438 1.219,0.365 10 false Combination Meter Assembly 2.948,3.646 6.563,3.865 3.615,0.219 10 false *1: for 1GR-FE, 1KD-FTV, 1GD-FTV w/ Combination Switch 2.958,3.969 6.656,4.198 3.698,0.229 10 false *2: for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch 0.49,3.385 2.865,3.76 2.375,0.375 10 false Center Differential Lock Switch (No. 2 Combination Switch Assembly)*2*3

PROCEDURE

1.CHECK CENTER DIFFERENTIAL LOCK INDICATOR LIGHT
a.

Turn the ignition switch to ON.


b.

Check the center differential lock indicator light.


c.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/ Combination Switch (Automatic Transmission):

Press the center differential lock switch (combination switch assembly).

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Automatic Transmission):

Press the center differential lock switch (No. 2 combination switch assembly).

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Manual Transmission):

Press the center differential lock switch.


d.

After 60 seconds, check the center differential lock indicator light.

Result
Result Proceed to
The center differential lock indicator light blinks, turns off or illuminates A
Center differential lock indicator light remains off regardless of switch operation B
Center differential lock indicator remains illuminated regardless of switch operation C
Center differential lock indicator light rapidly blinks D

Blinking: Blinks at 0.5 second intervals (0.5 seconds on and 0.5 seconds off)

Rapidly blinking: Blinks at 0.25 second intervals (0.25 seconds on and 0.25 seconds off)




A

END

B

2.CHECK CAN COMMUNICATION LINE

C

7.CHECK CAN COMMUNICATION LINE

D

2.CHECK CAN COMMUNICATION LINE
a.

Select "Bus Check" from the System Selection Menu screen, and follow the prompts on the screen to inspect the CAN bus (w/ Central Gateway ECU: See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/ Central Gateway ECU)>DIAGNOSIS SYSTEM, w/o Central Gateway ECU: See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/o Central Gateway ECU)>DIAGNOSIS SYSTEM).

OK:

"Bus Check" indicates no malfunctions in CAN communication.


Result
Result Proceed to
DTC is not output A
DTC is output w/ Central Gateway ECU B
w/o Central Gateway ECU C



A

3.READ VALUE USING GTS

B

C

3.READ VALUE USING GTS
a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the GTS on.


d.

Turn the ignition switch to ON.


e.

Enter the following menus: Powertrain / Four Wheel Drive / Data List.


f.

According to the display on the GTS, read the Data List.

Four Wheel Drive
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Center Differential Lock Control SW Center differential lock switch status/
ON or OFF
ON: Switch pressed and held
OFF: Switch not pressed
-

OK:

for 1GR-FE, 1KD-FTV, 1GD-FTV w/ Combination Switch (Automatic Transmission):

Display changes according to center differential lock switch (combination switch assembly) operation.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Automatic Transmission):

Display changes according to center differential lock switch (No. 2 combination switch assembly) operation.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Manual Transmission):

Display changes according to center differential lock switch operation.




OK

4.INSPECT COMBINATION METER ASSEMBLY

NG

5.INSPECT COMBINATION SWITCH ASSEMBLY OR CENTER DIFFERENTIAL LOCK SWITCH
4.INSPECT COMBINATION METER ASSEMBLY
a.

Turn the ignition switch off.


b.

Perform an Active Test of the combination meter assembly using the GTS (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST).


c.

Check the combination meter assembly.

OK:

The center differential lock indicator light turns on or off in accordance with the GTS.




OK

REPLACE 4 WHEEL DRIVE CONTROL ECU

NG

5.INSPECT COMBINATION SWITCH ASSEMBLY OR CENTER DIFFERENTIAL LOCK SWITCH
a.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/ Combination Switch (Automatic Transmission):

i.

Remove the center differential lock switch (combination switch assembly) (See page Drivetrain>VF4BM (TRANSFER / 4WD / AWD)>CENTER DIFFERENTIAL LOCK SWITCH(w/ Combination Switch)>REMOVAL).


ii.

Inspect the center differential lock switch (combination switch assembly) (See page Drivetrain>VF4BM (TRANSFER / 4WD / AWD)>CENTER DIFFERENTIAL LOCK SWITCH(w/ Combination Switch)>INSPECTION).

OK:

The center differential lock switch (combination switch assembly) operates normally.




b.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Automatic Transmission):

i.

Remove the center differential lock switch (No. 2 combination switch assembly) (See page Drivetrain>VF4BM (TRANSFER / 4WD / AWD)>CENTER DIFFERENTIAL LOCK SWITCH(w/o Combination Switch)>REMOVAL).


ii.

Inspect the center differential lock switch (No. 2 combination switch assembly) (See page Drivetrain>VF4BM (TRANSFER / 4WD / AWD)>CENTER DIFFERENTIAL LOCK SWITCH(w/o Combination Switch)>INSPECTION).

OK:

The center differential lock switch (No. 2 combination switch assembly) operates normally.




c.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Manual Transmission):


ii.

Inspect the center differential lock switch (See page Drivetrain>VF4BM (TRANSFER / 4WD / AWD)>CENTER DIFFERENTIAL LOCK SWITCH(w/o Combination Switch)>INSPECTION).

OK:

The center differential lock switch operates normally.




Result:
Result Proceed to
OK A
NG for 1GR-FE, 1KD-FTV, 1GD-FTV w/ Combination Switch (Automatic Transmission) or B
for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Automatic Transmission) C
for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Manual Transmission) D



A

6.CHECK HARNESS AND CONNECTOR (4 WHEEL DRIVE CONTROL ECU - COMBINATION SWITCH ASSEMBLY OR CENTER DIFFERENTIAL LOCK SWITCH)

B

C

D

6.CHECK HARNESS AND CONNECTOR (4 WHEEL DRIVE CONTROL ECU - COMBINATION SWITCH ASSEMBLY OR CENTER DIFFERENTIAL LOCK SWITCH)
a.

Disconnect the G53 4 wheel drive control ECU connector.


b.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/ Combination Switch (Automatic Transmission):

Disconnect the G156 center differential lock switch (combination switch assembly) connector.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Automatic Transmission):

Disconnect the G156 center differential lock switch (No. 2 combination switch assembly) connector.


c.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Manual Transmission):

Disconnect the G230 center differential lock switch connector.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for 1GR-FE, 1KD-FTV, 1GD-FTV w/ Combination Switch (Automatic Transmission) or for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Automatic Transmission):
Tester Connection Condition Specified Condition
G53-6 (DL) - G156-3 (CPU) Always Below 1 Ω
G156-24 (E) - Body ground Always Below 1 Ω

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Manual Transmission):
Tester Connection Condition Specified Condition
G53-6 (DL) - G230-5 (CPU) Always Below 1 Ω
G230-2 (L) - Body ground Always Below 1 Ω




OK

REPLACE 4 WHEEL DRIVE CONTROL ECU

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

7.CHECK CAN COMMUNICATION LINE
a.

Select "Bus Check" from the System Selection Menu screen, and follow the prompts on the screen to inspect the CAN bus (w/ Central Gateway ECU: See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/ Central Gateway ECU)>DIAGNOSIS SYSTEM, w/o Central Gateway ECU: See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/o Central Gateway ECU)>DIAGNOSIS SYSTEM).

OK:

"Bus Check" indicates no malfunctions in CAN communication.


Result
Result Proceed to
DTC is not output A
DTC is output w/ Central Gateway ECU B
w/o Central Gateway ECU C



A

8.READ VALUE USING GTS (CENTER DIFFERENTIAL LOCK INDICATOR LIGHT)

B

C

8.READ VALUE USING GTS (CENTER DIFFERENTIAL LOCK INDICATOR LIGHT)
a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the GTS on.


d.

Turn the ignition switch to ON.


e.

Enter the following menus: Powertrain / Four Wheel Drive / Data List.


f.

According to the display on the GTS, read the Data List.

Four Wheel Drive
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Center Differential Lock Indicator Request Center differential lock indicator light request/
Blink3, Blink2, Blink1, ON or OFF
·

Blink3: Indicator light rapidly blinks

·

Blink2: Indicator light blinks 3 times

·

Blink1: Indicator light blinks

·

ON: Indicator light illuminates

·

OFF: Indicator light turns off


·

Blinking: 0.5 second intervals (0.5 seconds on and 0.5 seconds off)

·

Rapidly blinking: 0.25 second intervals (0.25 seconds on and 0.25 seconds off)



i.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/ Combination Switch (Automatic Transmission):

Turn the differential lock switch (combination switch assembly) on and off several times and check the GTS display condition of the center differential lock indicator light.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Automatic Transmission):

Turn the differential lock switch (No. 2 combination switch assembly) on and off several times and check the GTS display condition of the center differential lock indicator light.

for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Manual Transmission):

Turn the differential lock switch on and off several times and check the GTS display condition of the center differential lock indicator light.

Result:
Result Proceed to
Data List continues to display ON even when center differential lock switch (combination switch assembly) is operated*1
Data List continues to display ON even when center differential lock switch (No. 2 combination switch assembly) is operated*2
Data List continues to display ON even when center differential lock switch is operated*3
A
Data List display changes according to center differential lock switch (combination switch assembly) operation*1
Data List display changes according to center differential lock switch (No. 2 combination switch assembly) operation*2
Data List display changes according to center differential lock switch operation*3
B


*1: for 1GR-FE, 1KD-FTV, 1GD-FTV w/ Combination Switch (Automatic Transmission)

*2: for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Automatic Transmission)

*3: for 1GR-FE, 1KD-FTV, 1GD-FTV w/o Combination Switch (Manual Transmission)





A

REPLACE 4 WHEEL DRIVE CONTROL ECU

B