Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER › 2017.08–2020.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260975 INSTRUMENT PANEL SPEAKER A

AUDIO / VIDEO  INSTRUMENT PANEL SPEAKER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 86160L 1.INSTALL FRONT NO. 4 SPEAKER ASSEMBLY

a.

Connect the connector.


b.

Install the front No. 4 speaker assembly with the 2 screws.

NOTICE:
·

Do not touch the cone of the speaker.

·

When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.




Hide 55421B 2.INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL

Hide 86140A 3.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

Hide 86160P 4.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

a.

Connect the connector.


b.

Install the front No. 2 speaker assembly with the 2 screws.

NOTICE:
·

Do not touch the cone of the speaker.

·

When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.




Hide 55408F 5.INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

Hide 74616C 8.INSTALL FRONT NO. 1 ASSIST GRIP PLUG LH

Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION