Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
84453
1.INSTALL IDLE UP SWITCH
Attach the 2 claws to install the idle up switch.
55045
2.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
55318C
3.INSTALL INSTRUMENT SIDE PANEL LH
62312B
4.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
Install the front door opening trim weatherstrip LH.
55606
5.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62112
6.INSTALL COWL SIDE TRIM BOARD LH
67920
7.INSTALL DOOR SCUFF PLATE ASSEMBLY LH
58191
8.INSTALL FRONT FLOOR FOOTREST (for LHD)
87290
9.INSTALL HEATER SWITCH ASSEMBLY
Attach the 2 claws and install the heater switch assembly.
55480D
10.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY