Home › Engine / Hybrid System › 1KD-FTV (COOLING) › RADIATOR › 2017.08–2020.08
RM27T0E _51 Engine / Hybrid System _053682 1KD-FTV COOLING _0260664 RADIATOR A

1KD-FTV COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16547 1.INSTALL NO. 1 RADIATOR SUPPORT BUSH

a.

Install the 4 No. 1 radiator support bushes to the radiator assembly.


Hide 16534 2.INSTALL NO. 2 RADIATOR SUPPORT

a.

Install the 2 No. 2 radiator supports to the radiator assembly.


Hide 16533B 3.INSTALL NO. 1 RADIATOR SUPPORT

a.

Install the 2 No. 1 radiator supports to the radiator assembly.


Hide 4.INSTALL VACUUM TRANSMITTING PIPE SUB-ASSEMBLY

a.

Attach the 2 clamps and install the vacuum transmitting pipe sub-assembly to the radiator assembly.


Hide 17940D 5.INSTALL INTERCOOLER ASSEMBLY

Hide 16562 6.INSTALL NO. 2 RADIATOR TO SUPPORT SEAL

Hide 16593 7.INSTALL NO. 1 RADIATOR AIR GUIDE

a.

Install a new No. 3 radiator to support seal to the No. 1 radiator air guide.


b.

Install the No. 1 radiator air guide to the radiator assembly with intercooler assembly with the 2 bolts.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


Hide 16400 8.INSTALL RADIATOR ASSEMBLY WITH INTERCOOLER ASSEMBLY

a.

Install 2 new No. 1 radiator to support seals to the radiator assembly.


b.
A308733

Insert the tabs of the radiator support into the radiator service holes.


c.

Install the radiator assembly with intercooler assembly to the radiator support with the 4 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 16572D 9.CONNECT NO. 2 RADIATOR HOSE

a.
A224970E02
0.333,0.896 0.51,1.063 0.177,0.167 10 false *a 0.927,1.438 1.104,1.604 0.177,0.167 10 false *b

Connect the No. 2 radiator hose to the radiator assembly and slide the clamp to secure the hose.

Text in Illustration
*a Upper
*b RH Side

HINT:

Make sure the direction of the hose clamp is as shown in the illustration.



Hide 17342F 11.INSTALL INTERCOOLER AIR HOSE

Hide 17341F 12.INSTALL NO. 1 AIR HOSE

Hide 16571C 13.INSTALL NO. 1 RADIATOR HOSE

Hide 82123 14.INSTALL NO. 3 ENGINE WIRE (for Cold Area Specification Vehicles)

Hide 53294C 15.INSTALL RADIATOR SIDE DEFLECTOR LH

a.

Attach the 3 claws to the radiator support.


b.

Install the radiator side deflector LH with the clip.


Hide 53293C 16.INSTALL RADIATOR SIDE DEFLECTOR RH

a.

Attach the 3 claws to the radiator support.


b.

Install the radiator side deflector RH with the clip.


Hide 52521 17.INSTALL FRONT BUMPER CENTER UPPER RETAINER

Hide 52119A 18.INSTALL FRONT BUMPER COVER

Hide 19.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Cold Area Specification Vehicles)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 51405A 22.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 52129B 23.INSTALL FRONT BUMPER LOWER COVER

Hide 53292A 24.INSTALL UPPER RADIATOR SUPPORT SEAL

a.

Install the upper radiator support seal with the 13 clips.