Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › MULTI-TERRAIN MONITOR SYSTEM › 2017.08–2020.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0328431 MULTI-TERRAIN MONITOR SYSTEM C

PARK ASSIST / MONITORING  MULTI-TERRAIN MONITOR SYSTEM  C1683  Side Camera Feedback Malfunction  


DESCRIPTION

DTC C1683 is stored if the parking assist ECU judges as a result of its self check that a synchronization problem is occurring in the image signal sent from the side television camera assembly to the parking assist ECU.

DTC Code DTC Detection Condition Trouble Area
C1683 Side Camera Feedback Malfunction
·

Harness or connector

·

Parking assist ECU

·

Side television camera assembly RH (for LHD)

·

Outer rear view mirror assembly RH (for LHD)

·

Side television camera assembly LH (for RHD)

·

Outer rear view mirror assembly LH (for RHD)



WIRING DIAGRAM

for LHD


E382440E01
5.688,2.604 7.156,2.792 1.469,0.188 10 false Parking Assist ECU 5.667,2.406 5.958,2.646 0.292,0.24 10 false I7 6,0.677 6.615,0.875 0.615,0.198 10 false SCB+ 5.99,1.042 6.604,1.24 0.615,0.198 10 false SCV+ 6.021,1.406 6.635,1.604 0.615,0.198 10 false SCV- 6.021,1.802 6.635,2 0.615,0.198 10 false SGND 3.313,1.677 3.927,1.875 0.615,0.198 10 false DGND 3.375,1.313 3.99,1.51 0.615,0.198 10 false DCV- 3.375,0.917 3.99,1.115 0.615,0.198 10 false DCV+ 3.344,0.563 3.958,0.76 0.615,0.198 10 false DCB+ 3.906,0.542 4.198,0.781 0.292,0.24 10 false 6 3.917,0.948 4.208,1.188 0.292,0.24 10 false 2 3.917,1.292 4.208,1.531 0.292,0.24 10 false 3 3.917,1.698 4.208,1.938 0.292,0.24 10 false 7 5.708,0.563 6,0.802 0.292,0.24 10 false 31 5.729,1.281 6.021,1.521 0.292,0.24 10 false 33 5.708,0.938 6,1.177 0.292,0.24 10 false 10 5.729,1.698 6.021,1.938 0.292,0.24 10 false 32 4.76,1.948 5.052,2.188 0.292,0.24 10 false * 0.188,3.49 1.271,3.719 1.083,0.229 10 false *: Shielded 0.49,2.177 0.781,2.417 0.292,0.24 10 false A 0.667,3.115 3.063,3.354 2.396,0.24 10 false Outer Rear View Mirror Assembly RH 0.458,2.365 2.854,2.604 2.396,0.24 10 false Side Television Camera Assembly RH 0.688,2.927 0.979,3.167 0.292,0.24 10 false J11 1.083,0.688 1.698,0.885 0.615,0.198 10 false SCB+ 1.74,0.896 2.031,1.135 0.292,0.24 10 false 3 1.719,1.271 2.01,1.51 0.292,0.24 10 false 7 1.729,1.667 2.021,1.906 0.292,0.24 10 false 5 1.76,0.552 2.052,0.792 0.292,0.24 10 false 1 1.073,1.031 1.688,1.229 0.615,0.198 10 false SCV+ 1.115,1.406 1.729,1.604 0.615,0.198 10 false SCV- 1.063,1.823 1.677,2.021 0.615,0.198 10 false SGND


for RHD


E382440E02
5.688,2.604 7.156,2.792 1.469,0.188 10 false Parking Assist ECU 5.667,2.406 5.958,2.646 0.292,0.24 10 false I7 6,0.677 6.615,0.875 0.615,0.198 10 false SCB+ 5.99,1.042 6.604,1.24 0.615,0.198 10 false SCV+ 6.021,1.406 6.635,1.604 0.615,0.198 10 false SCV- 6.021,1.802 6.635,2 0.615,0.198 10 false SGND 3.906,0.542 4.198,0.781 0.292,0.24 10 false 6 3.917,0.948 4.208,1.188 0.292,0.24 10 false 2 3.917,1.292 4.208,1.531 0.292,0.24 10 false 3 3.917,1.698 4.208,1.938 0.292,0.24 10 false 7 5.708,0.563 6,0.802 0.292,0.24 10 false 31 5.729,1.281 6.021,1.521 0.292,0.24 10 false 33 5.708,0.938 6,1.177 0.292,0.24 10 false 10 5.729,1.698 6.021,1.938 0.292,0.24 10 false 32 4.76,1.948 5.052,2.188 0.292,0.24 10 false * 0.188,3.49 1.271,3.719 1.083,0.229 10 false *: Shielded 0.49,2.177 0.781,2.417 0.292,0.24 10 false B 0.667,3.115 3.063,3.354 2.396,0.24 10 false Outer Rear View Mirror Assembly LH 0.458,2.365 2.854,2.604 2.396,0.24 10 false Side Television Camera Assembly LH 0.688,2.927 0.979,3.167 0.292,0.24 10 false K11 1.74,0.896 2.031,1.135 0.292,0.24 10 false 3 1.719,1.271 2.01,1.51 0.292,0.24 10 false 7 1.729,1.667 2.021,1.906 0.292,0.24 10 false 5 1.76,0.552 2.052,0.792 0.292,0.24 10 false 1 3.396,0.573 4.01,0.771 0.615,0.198 10 false SCB+ 1.146,0.677 1.76,0.875 0.615,0.198 10 false SCB+ 3.365,0.938 3.979,1.135 0.615,0.198 10 false SCV+ 1.156,1.042 1.771,1.24 0.615,0.198 10 false SCV+ 3.396,1.323 4.01,1.521 0.615,0.198 10 false SCV- 1.146,1.417 1.76,1.615 0.615,0.198 10 false SCV- 3.323,1.708 3.938,1.906 0.615,0.198 10 false SGND 1.177,1.802 1.792,2 0.615,0.198 10 false SGND


CAUTION / NOTICE / HINT

NOTICE:
·

When "!" mark is displayed on the navigation receiver assembly*1 or radio and display receiver assembly*2 after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>MULTI-TERRAIN MONITOR SYSTEM>INITIALIZATION

*1: for Navigation Receiver Type

*2: for Radio and Display Type


·

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the multi-terrain monitor system may be needed.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



PROCEDURE

1.CHECK FOR DTC


Result:
Result Proceed to
OK A
NG (for LHD) B
NG (for RHD) C



A

B

2.CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - OUTER REAR VIEW MIRROR ASSEMBLY RH)

C

9.CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - OUTER REAR VIEW MIRROR ASSEMBLY LH)
2.CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - OUTER REAR VIEW MIRROR ASSEMBLY RH)
a.

Disconnect the I7 parking assist ECU connector.


b.

Disconnect the J11 outer rear view mirror assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I7-31 (SCB+) - J11-6 (DCB+) Always Below 1 Ω
I7-10 (SCV+) - J11-2 (DCV+) Always Below 1 Ω
I7-33 (SCV-) - J11-3 (DCV-) Always Below 1 Ω
I7-32 (SGND) - J11-7 (DGND) Always Below 1 Ω
I7-31 (SCB+) or J11-6 (DCB+) - Body ground Always 10 kΩ or higher
I7-10 (SCV+) or J11-2 (DCV+) - Body ground Always 10 kΩ or higher
I7-33 (SCV-) or J11-3 (DCV-) - Body ground Always 10 kΩ or higher
I7-32 (SGND) or J11-7 (DGND) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.CHECK PARKING ASSIST ECU (SCV-, SGND)

NG

3.CHECK PARKING ASSIST ECU (SCV-, SGND)
a.
E330226C06
1.5,0.573 1.833,0.813 0.333,0.24 1.833,1.802 1.604,1.802 1.604,1.802 1.51,1.156 true 1.125,1.802 1.292,1.802 1.292,1.802 1.438,1.156 true 0.115,0.094 0.427,0.25 0.313,0.156 10 false *a 1.906,1.719 2.406,1.875 0.5,0.156 10 false SGND 0.74,1.719 1.24,1.875 0.5,0.156 10 false SCV- 1.625,0.615 1.938,0.813 0.313,0.198 10 false I7
*a Component without harness connected
(Parking Assist ECU)


Disconnect the parking assist ECU connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
32 (SGND) - Body ground Always Below 1 Ω
33 (SCV-) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

4.CHECK PARKING ASSIST ECU (SCB+, SGND)

NG

4.CHECK PARKING ASSIST ECU (SCB+, SGND)
a.
E245958C77
1.479,0.594 1.896,0.792 0.417,0.198 1.573,1.156 2.042,1.938 2.042,1.938 2.219,1.938 true 1,1.938 1.156,1.938 1.156,1.938 1.5,1.156 true 1.625,0.625 2.125,0.823 0.5,0.198 10 false I7 0.563,1.865 1.177,2.063 0.615,0.198 10 false SGND 2.25,1.865 2.792,2.031 0.542,0.167 10 false SCB+ 0.115,0.083 0.729,0.281 0.615,0.198 10 false *a
*a Component with harness connected
(Parking Assist ECU)


Disconnect the outer rear view mirror assembly RH connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
I7-31 (SCB+) - I7-32 (SGND) Engine switch on (ACC) 5.5 to 7.05 V
I7-31 (SCB+) - I7-32 (SGND) Engine switch off Below 1 V



Result:
Proceed to
OK
NG



OK

5.CHECK SIDE TELEVISION CAMERA ASSEMBLY RH (SCV+, SGND)

NG

5.CHECK SIDE TELEVISION CAMERA ASSEMBLY RH (SCV+, SGND)
a.

Remove the parking assist ECU with the connector still connected.


b.

Using an oscilloscope, check the waveform of the side television camera assembly RH.

HINT:

A waterproof connector is used for the side television camera assembly RH. Therefore, inspect the waveform at the parking assist ECU with the connector connected.


E245725C40
0.75,0.292 1.25,0.542 0.5,0.25 0.781,0.969 0.677,0.719 0.677,0.719 0.521,0.719 true 1.135,1.365 0.99,1.365 0.99,1.365 0.875,1.115 true 4.302,2.052 4.104,1.552 true 6.333,2.052 6.083,1.406 true 5.802,2.031 5.969,1.458 true 3.813,2.031 3.969,1.594 true 0.167,0.667 0.688,0.865 0.521,0.198 10 false SCV+ 1.198,1.292 1.677,1.469 0.479,0.177 10 false SGND 3.365,1.188 3.844,1.365 0.479,0.177 10 false GND 5.271,1.188 5.75,1.365 0.479,0.177 10 false GND 0.083,0.063 0.563,0.24 0.479,0.177 10 false *a 3.469,0.083 3.948,0.26 0.479,0.177 10 false *b 5.417,0.073 5.896,0.25 0.479,0.177 10 false *c 6.302,2.094 6.781,2.271 0.479,0.177 10 false *e 4.271,2.083 4.75,2.26 0.479,0.177 10 false *e 5.688,2.094 6.167,2.271 0.479,0.177 10 false *d 3.74,2.083 4.219,2.26 0.479,0.177 10 false *d 0.896,0.323 1.375,0.5 0.479,0.177 10 false I7
*a Component with harness connected
(Parking Assist ECU)
*b Waveform 1 (camera lens not covered, displaying an image)
*c Waveform 2 (camera lens covered, blacking out the screen) *d Synchronization Signal
*e Video Waveform - -


HINT:

The video waveform changes according to the image sent by the side television camera assembly RH.


Measurement Condition
Item Content
Tester Connection I7-10 (SCV+) - I7-32 (SGND)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Engine switch on (IG), panoramic view monitor switch (multi-terrain monitor switch) on

OK:

Waveform is similar to that shown in illustration.



Result:
Proceed to
OK
NG



OK

NG

6.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
6.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
a.
E380692C03
1.552,0.167 1.844,0.396 0.292,0.229 1.958,0.948 2.344,0.458 2.344,0.458 2.469,0.458 true 1.979,1.229 2.271,1.563 2.271,1.563 2.417,1.563 true 1.615,2.802 1.25,3.25 1.25,3.25 1.115,3.25 true 1.74,2.802 2.073,3.229 2.073,3.229 2.198,3.229 true 1.615,2.531 1.063,2.115 1.063,2.115 0.927,2.115 true 1.781,2.521 2.292,2.208 2.292,2.208 2.417,2.208 true 1.438,1 1.063,0.667 1.063,0.667 0.927,0.667 true 1.396,1.219 1.052,1.344 1.052,1.344 0.917,1.344 true 0.271,0.375 0.448,0.552 0.177,0.177 10 false *a 0.302,1.719 0.479,1.896 0.177,0.177 10 false *b 1.667,0.208 1.792,0.365 0.125,0.156 10 false A 2.542,0.396 2.969,0.573 0.427,0.177 10 false SCB+ 2.469,1.5 2.969,1.75 0.5,0.25 10 false SGND 0.719,3.177 1.188,3.375 0.469,0.198 10 false DCB+ 2.25,3.177 2.76,3.427 0.51,0.25 10 false DGND 0.458,2.042 0.885,2.219 0.427,0.177 10 false DCV+ 2.51,2.115 2.938,2.292 0.427,0.177 10 false DCV- 0.521,0.594 0.948,0.771 0.427,0.177 10 false SCV+ 0.5,1.26 0.927,1.438 0.427,0.177 10 false SCV-
*a Component without harness connected
(to Side Television Camera Assembly RH)
*b Component without harness connected
(to Outer Mirror Actuator Assembly RH)


Disconnect the outer rear view mirror assembly RH connector.


b.

Disconnect the side television camera assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-1 (SCB+) - J11-6 (DCB+) Always Below 1 Ω
A-3 (SCV+) - J11-2 (DCV+) Always Below 1 Ω
A-7 (SCV-) - J11-3 (DCV-) Always Below 1 Ω
A-5 (SGND) - J11-7 (DGND) Always Below 1 Ω
A-1 (SCB+) or J11-6 (DCB+) - Body ground Always 10 kΩ or higher
A-3 (SCV+) or J11-2 (DCV+) - Body ground Always 10 kΩ or higher
A-7 (SCV-) or J11-3 (DCV-) - Body ground Always 10 kΩ or higher
A-5 (SGND) or J11-7 (DGND) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

7.CHECK SIDE TELEVISION CAMERA ASSEMBLY RH

NG

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH

7.CHECK SIDE TELEVISION CAMERA ASSEMBLY RH
a.

Replace the side television camera assembly RH with a new or normally functioning one.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TELEVISION CAMERA (for Side)>REMOVAL


Result:
Proceed to
NEXT



NEXT

8.CHECK FOR DTC
8.CHECK FOR DTC

OK

END (SIDE TELEVISION CAMERA ASSEMBLY RH IS DEFECTIVE)

NG

9.CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - OUTER REAR VIEW MIRROR ASSEMBLY LH)
a.

Disconnect the I7 parking assist ECU connector.


b.

Disconnect the K11 outer rear view mirror assembly LH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I7-31 (SCB+) - K11-6 (SCB+) Always Below 1 Ω
I7-10 (SCV+) - K11-2 (SCV+) Always Below 1 Ω
I7-33 (SCV-) - K11-3 (SCV-) Always Below 1 Ω
I7-32 (SGND) - K11-7 (SGND) Always Below 1 Ω
I7-31 (SCB+) or K11-6 (SCB+) - Body ground Always 10 kΩ or higher
I7-10 (SCV+) or K11-2 (SCV+) - Body ground Always 10 kΩ or higher
I7-33 (SCV-) or K11-3 (SCV-) - Body ground Always 10 kΩ or higher
I7-32 (SGND) or K11-7 (SGND) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

10.CHECK PARKING ASSIST ECU (SCV-, SGND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

10.CHECK PARKING ASSIST ECU (SCV-, SGND)
a.
E330226C06
1.5,0.573 1.833,0.813 0.333,0.24 1.833,1.802 1.604,1.802 1.604,1.802 1.51,1.156 true 1.125,1.802 1.292,1.802 1.292,1.802 1.438,1.156 true 0.115,0.094 0.427,0.25 0.313,0.156 10 false *a 1.906,1.719 2.406,1.875 0.5,0.156 10 false SGND 0.74,1.719 1.24,1.875 0.5,0.156 10 false SCV- 1.625,0.615 1.938,0.813 0.313,0.198 10 false I7
*a Component without harness connected
(Parking Assist ECU)


Disconnect the parking assist ECU connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
32 (SGND) - Body ground Always Below 1 Ω
33 (SCV-) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

11.CHECK PARKING ASSIST ECU (SCB+, SGND)

NG

11.CHECK PARKING ASSIST ECU (SCB+, SGND)
a.
E245958C77
1.479,0.594 1.896,0.792 0.417,0.198 1.573,1.156 2.042,1.938 2.042,1.938 2.219,1.938 true 1,1.938 1.156,1.938 1.156,1.938 1.5,1.156 true 1.625,0.625 2.125,0.823 0.5,0.198 10 false I7 0.563,1.865 1.177,2.063 0.615,0.198 10 false SGND 2.25,1.865 2.792,2.031 0.542,0.167 10 false SCB+ 0.115,0.083 0.729,0.281 0.615,0.198 10 false *a
*a Component with harness connected
(Parking Assist ECU)


Disconnect the outer rear view mirror assembly LH connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
I7-31 (SCB+) - I7-32 (SGND) Engine switch on (ACC) 5.5 to 7.05 V
I7-31 (SCB+) - I7-32 (SGND) Engine switch off Below 1 V



Result:
Proceed to
OK
NG



OK

12.CHECK SIDE TELEVISION CAMERA ASSEMBLY LH (SCV+, SGND)

NG

12.CHECK SIDE TELEVISION CAMERA ASSEMBLY LH (SCV+, SGND)
a.

Remove the parking assist ECU with the connector still connected.


b.

Using an oscilloscope, check the waveform of the side television camera assembly LH.

HINT:

A waterproof connector is used for the side television camera assembly LH. Therefore, inspect the waveform at the parking assist ECU with the connector connected.


E245725C40
0.75,0.292 1.25,0.542 0.5,0.25 0.781,0.969 0.677,0.719 0.677,0.719 0.521,0.719 true 1.135,1.365 0.99,1.365 0.99,1.365 0.875,1.115 true 4.302,2.052 4.104,1.552 true 6.333,2.052 6.083,1.406 true 5.802,2.031 5.969,1.458 true 3.813,2.031 3.969,1.594 true 0.167,0.667 0.688,0.865 0.521,0.198 10 false SCV+ 1.198,1.292 1.677,1.469 0.479,0.177 10 false SGND 3.365,1.188 3.844,1.365 0.479,0.177 10 false GND 5.271,1.188 5.75,1.365 0.479,0.177 10 false GND 0.083,0.063 0.563,0.24 0.479,0.177 10 false *a 3.469,0.083 3.948,0.26 0.479,0.177 10 false *b 5.417,0.073 5.896,0.25 0.479,0.177 10 false *c 6.302,2.094 6.781,2.271 0.479,0.177 10 false *e 4.271,2.083 4.75,2.26 0.479,0.177 10 false *e 5.688,2.094 6.167,2.271 0.479,0.177 10 false *d 3.74,2.083 4.219,2.26 0.479,0.177 10 false *d 0.896,0.323 1.375,0.5 0.479,0.177 10 false I7
*a Component with harness connected
(Parking Assist ECU)
*b Waveform 1 (camera lens not covered, displaying an image)
*c Waveform 2 (camera lens covered, blacking out the screen) *d Synchronization Signal
*e Video Waveform - -


HINT:
·

The video waveform changes according to the image sent by the side television camera assembly LH.

·

The video waveform is constantly output when the engine switch is on (ACC).



Measurement Condition
Item Content
Tester Connection I7-10 (SCV+) - I7-32 (SGND)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Engine switch on (IG), panoramic view monitor switch (multi-terrain monitor switch) on

OK:

Waveform is similar to that shown in illustration.



Result:
Proceed to
OK
NG



OK

NG

13.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
13.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
a.
E380692C04
1.552,0.167 1.844,0.396 0.292,0.229 1.958,0.948 2.344,0.458 2.344,0.458 2.469,0.458 true 1.979,1.229 2.271,1.563 2.271,1.563 2.417,1.563 true 1.615,2.802 1.25,3.25 1.25,3.25 1.115,3.25 true 1.74,2.802 2.073,3.229 2.073,3.229 2.198,3.229 true 1.615,2.531 1.063,2.115 1.063,2.115 0.927,2.115 true 1.781,2.521 2.292,2.208 2.292,2.208 2.417,2.208 true 1.438,1 1.063,0.667 1.063,0.667 0.927,0.667 true 1.396,1.219 1.052,1.344 1.052,1.344 0.917,1.344 true 0.271,0.375 0.448,0.552 0.177,0.177 10 false *a 0.302,1.719 0.479,1.896 0.177,0.177 10 false *b 1.656,0.208 1.781,0.365 0.125,0.156 10 false B 2.542,0.396 2.969,0.573 0.427,0.177 10 false SCB+ 2.469,1.5 3.031,1.792 0.563,0.292 10 false SGND 0.74,3.188 1.167,3.365 0.427,0.177 10 false SCB+ 2.25,3.177 2.833,3.427 0.583,0.25 10 false SGND 0.458,2.042 0.927,2.229 0.469,0.188 10 false SCV+ 2.51,2.115 2.938,2.292 0.427,0.177 10 false SCV- 0.521,0.594 0.948,0.771 0.427,0.177 10 false SCV+ 0.5,1.26 0.927,1.438 0.427,0.177 10 false SCV-
*a Component without harness connected
(to Side Television Camera Assembly LH)
*b Component without harness connected
(to Outer Mirror Actuator Assembly LH)


Disconnect the outer rear view mirror assembly LH connector.


b.

Disconnect the side television camera assembly LH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B-1 (SCB+) - K11-6 (SCB+) Always Below 1 Ω
B-3 (SCV+) - K11-2 (SCV+) Always Below 1 Ω
B-7 (SCV-) - K11-3 (SCV-) Always Below 1 Ω
B-5 (SGND) - K11-7 (SGND) Always Below 1 Ω
B-1 (SCB+) or K11-6 (SCB+) - Body ground Always 10 kΩ or higher
B-3 (SCV+) or K11-2 (SCV+) - Body ground Always 10 kΩ or higher
B-7 (SCV-) or K11-3 (SCV-) - Body ground Always 10 kΩ or higher
B-5 (SGND) or K11-7 (SGND) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

14.CHECK SIDE TELEVISION CAMERA ASSEMBLY LH

NG

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH

14.CHECK SIDE TELEVISION CAMERA ASSEMBLY LH
a.

Replace the side television camera assembly LH with a new or normally functioning one.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TELEVISION CAMERA (for Side)>REMOVAL


Result:
Proceed to
NEXT



NEXT

15.CHECK FOR DTC
15.CHECK FOR DTC

OK

END (SIDE TELEVISION CAMERA ASSEMBLY LH IS DEFECTIVE)

NG