Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST ECU (for RHD) › 2017.08–2020.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261006 PARKING ASSIST ECU(for RHD) A

PARK ASSIST / MONITORING  PARKING ASSIST ECU(for RHD)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 67910 3.REMOVE DOOR SCUFF PLATE ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for 5 Door)>REMOVAL


Hide 62111C 4.REMOVE COWL SIDE TRIM BOARD RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for 5 Door)>REMOVAL


Hide 55317A 5.REMOVE INSTRUMENT SIDE PANEL RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL


Hide 55476C 6.REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH

Hide 55480D 7.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

Hide 55606 8.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55045 9.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

Hide 73900 10.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 82730A 11.REMOVE DRIVER SIDE JUNCTION BLOCK ASSEMBLY

Hide 86792C 12.REMOVE PARKING ASSIST ECU

B359152

a.

Disconnect the 3 connectors.


b.

Remove the 2 bolts and parking assist ECU.