89424D
1.INSTALL INTAKE AIR TEMPERATURE SENSOR (for Intercooler)
89422C
2.INSTALL ENGINE COOLANT TEMPERATURE SENSOR (for Intercooler)
17940D
3.INSTALL INTERCOOLER ASSEMBLY
Install the intercooler assembly to the intercooler bracket with the 4 bolts.
Connect the intake air temperature sensor (for intercooler) connector to the intercooler assembly.
Attach the intake air temperature sensor (for intercooler) harness clamp to the intercooler assembly.
Install the coolant temperature sensor (for intercooler) harness bracket to the intercooler assembly with the bolt.
Connect the coolant temperature sensor (for intercooler) connector to the intercooler assembly.
17360E
4.INSTALL NO. 1 AIR TUBE ASSEMBLY
| *a | Retainer |
| *b | Protrusion |
| *c | Stopper |
Connect the compressor outlet elbow to the intercooler assembly and lock the 2 retainers as shown in the illustration.
Securely insert the retainer so that the 4 locks are engaged. Then, pull and check that the locks are engaged and that the hose cannot be pulled out.
Install so that the protrusion on the intercooler assembly and the stoppers are aligned.
17030
5.INSTALL AIR HOSE ASSEMBLY
| *a | Retainer |
| *b | Protrusion |
| *c | Stopper |
Connect the air tube assembly to the intercooler assembly and lock the 2 retainers as shown in the illustration.
Securely insert the retainer so that the 4 locks are engaged. Then, pull and check that the locks are engaged and that the hose cannot be pulled out.
Install so that the protrusion on the intercooler assembly and the stoppers are aligned.
6.INSTALL INTERCOOLER COOLING WATER PIPE
Install the intercooler cooling water pipe to the No. 2 water by-pass pipe with the 2 bolts.
Connect the intercooler cooling water inlet hose and intercooler cooling water outlet hose to the intercooler assembly and slide the 2 clamps to secure the hoses.
7.CONNECT INTERCOOLER COOLING WATER HOSE
Connect the 2 intercooler cooling hoses to the intercooling water pipe and slide the 2 clamps to secure the hoses.
16575C
8.INSTALL NO. 1 WATER HOSE CLAMP BRACKET
Install the No. 1 water hose clamp bracket to the intercooler assembly with the bolt.
1629E
9.INSTALL NO. 18 WATER BY-PASS HOSE
Install the No. 18 water by-pass hose to the water pipe, electric EGR valve assembly and slide the 2 clamps to secure the hoses.
87209
10.CONNECT WATER HOSE SUB-ASSEMBLY
Connect the 2 water hoses to the water pipe and slide the 2 clamps to secure the hoses.
12633
11.INSTALL NO. 3 ENGINE COVER BRACKET
Install the No. 3 engine cover bracket to the intercooler assembly with the 2 bolts.
12601B
12.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
13.ADD ENGINE COOLANT
14.ADD ENGINE COOLANT (w/ Urea SCR System)
15.INSPECT FOR COOLANT LEAK
16.INSPECT FOR COOLANT LEAK (w/ Urea SCR System)