Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EGR VALVE › 2018.06–2020.08
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260627 EGR VALVE A

1GD-FTV EMISSION CONTROL  EGR VALVE  REMOVAL  


PROCEDURE

Hide 17940D 3.REMOVE INTERCOOLER ASSEMBLY (w/ Urea SCR System)

Hide 55781E 4.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

Hide 26100G 5.REMOVE DIESEL THROTTLE BODY ASSEMBLY

Hide 87209 6.REMOVE WATER HOSE SUB-ASSEMBLY

a.

w/ Rear Air Conditioning System:

i.
A417222

Slide the 2 clamps and disconnect the 2 water hoses from the water pipe.


ii.

Slide the 2 clamps and remove the 2 water hoses from the air conditioning unit assembly.



b.

w/o Rear Air Conditioning System:

i.
A417223

Slide the 2 clamps and remove the 2 water hoses from the air conditioning unit assembly.



Hide 16278 7.REMOVE NO. 2 WATER BY-PASS PIPE

a.
A417199

w/ Viscous Heater:

Slide the clamp and disconnect the water by-pass hose sub-assembly from the No. 2 water by-pass pipe.


b.

w/o Viscous Heater:

Slide the clamp and disconnect the No. 13 water by-pass hose from the No. 2 water by-pass pipe.


c.

Slide the clamp and disconnect the No. 15 water by-pass hose from the water by-pass pipe.


d.

Slide the clamp and disconnect the No. 16 water by-pass hose from the No. 1 EGR cooler.


e.

Remove the 3 bolts and No. 2 water by-pass pipe from the cylinder head cover sub-assembly, No. 3 water by-pass pipe sub-assembly and No. 2 engine cover bracket.


Hide 23265C 8.REMOVE GAS FILTER

a.
A424568C01
0.094,0.104 0.406,0.26 0.313,0.156 10 true *A 0.146,2.531 0.458,2.688 0.313,0.156 10 true *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Disconnect the 2 vacuum hoses from the turbo pressure sensor and intake manifold.


b.

Remove the gas filter from the gas filter bracket.


Hide 89421C 9.REMOVE DIESEL TURBO PRESSURE SENSOR

a.
A424567C01
0.146,0.094 0.458,0.25 0.313,0.156 10 true *A 0.167,2.573 0.479,2.729 0.313,0.156 10 true *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Disconnect the connector from the turbo pressure sensor.


b.

Remove the bolt and turbo pressure sensor from the No. 3 water by-pass pipe sub-assembly.


Hide 12633 10.REMOVE NO. 3 ENGINE COVER BRACKET (w/o Urea SCR System)

a.
A339756

Remove the 2 bolts and No. 3 engine cover bracket from the engine cover bracket and No. 2 engine cover bracket.


Hide 12632 11.REMOVE NO. 2 ENGINE COVER BRACKET (w/o Urea SCR System)

a.
A352125

Remove the 2 bolts and No. 2 engine cover bracket from the No. 3 water by-pass pipe sub-assembly and No. 2 EGR valve assembly.


Hide 77820 12.DISCONNECT UREA TANK FILLER PIPE ASSEMBLY (w/ Urea SCR System)

a.
A417202

Remove the 3 bolts and disconnect the urea tank filler pipe assembly from the No. 1 oil reservoir bracket assembly.


Hide 44306 13.DISCONNECT VANE PUMP OIL RESERVOIR SUB-ASSEMBLY

a.
A417203

Remove the 2 bolts and disconnect the vane pump oil reservoir sub-assembly from the body.


Hide 82121 14.DISCONNECT ENGINE WIRE

a.

w/o Urea SCR System:

i.
A352128

Detach the 2 clamps and disconnect the 2 connectors from the turbocharger sub-assembly.


ii.
A352129

Detach the clamp and disconnect the connector from the differential pressure sensor.


iii.

Disconnect the 3 connectors from the exhaust gas temperature sensors.


iv.

Disconnect the connector from the exhaust fuel addition injector assembly.


v.

Disconnect the camshaft position sensor.


vi.

Disconnect the 4 connectors from the 4 injector assemblies.


vii.

Disconnect the electric EGR control valve assembly.


viii.

Disconnect the connector from the glow plug connector.


ix.

Disconnect the connector from the sensor wire of common rail assembly.


x.

Detach the clamp and remove the bolt.


xi.
A352130

Detach the clamp and disconnect the 2 connectors from the vane pump assembly.


xii.

Detach the clamp and remove the bolt.


xiii.

Disconnect the 2 connectors from the 2 vacuum control valve sets.



b.

w/ Urea SCR System:

i.
A424493

Detach the 3 clamps and disconnect the 2 connectors from the turbocharger sub-assembly.


ii.

Disconnect the camshaft position sensor.


iii.

Disconnect the connector from the exhaust fuel addition injector assembly.


iv.
A424494

Remove the bolt and disconnect the engine wire from the engine cover bracket.


v.
A424495

Disconnect the connector from the differential pressure sensor.


vi.

Disconnect the 3 connectors from the 3 exhaust gas temperature sensors.


vii.

Detach the clamp and remove the bolt.


viii.
A424496

Disconnect the connector from the No. 1 nitrogen oxides sensor.


ix.

Disconnect the 4 connectors from the 4 injector assemblies.


x.

Disconnect the 2 connectors from the 2 sensor wires of common rail assembly.


xi.

Disconnect the connector from the glow plug connector.


xii.

Disconnect the electric EGR control valve assembly.


xiii.
A424497

Detach the clamp and remove the 3 bolts.


xiv.
A424498

Disconnect the 2 connectors from the vane pump assembly.


xv.

Disconnect the connector from the engine water temperature sensor.


xvi.

Detach the clamp and remove the bolt.


xvii.
A424499

Detach the clamp and disconnect the 2 connectors from the 2 vacuum control valve sets.


xviii.

Detach the clamp and remove the bolt, and disconnect the engine wire.



Hide 25625 15.REMOVE EGR VALVE BRACKET

a.
A352140

Remove the bolt, nut and EGR valve bracket from the electric EGR control valve assembly and intake manifold.


Hide 25612 16.REMOVE NO. 2 EGR PIPE

a.
A454582

Detach the 6 clamps and disconnect the engine room main wire.


b.
A352141

Remove the bolt, 4 nuts and No. 2 EGR pipe from the electric EGR control valve assembly and intake manifold.


c.

Remove the 2 gaskets.


Hide 25800 17.REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY

a.
A352142

Detach the clamp and disconnect the connector from the common rail assembly.


b.
A352143

Slide the clamp and disconnect the No. 9 water by-pass hose from the electric EGR control valve assembly.


c.

Remove the 2 bolts and electric EGR control valve assembly.


d.

Remove the gasket.


Hide 16206B 18.REMOVE NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A424569C01
0.135,0.125 0.448,0.281 0.313,0.156 10 true *A 0.167,2.594 0.479,2.75 0.313,0.156 10 true *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Disconnect the No. 4 fuel hose from the No. 3 water by-pass pipe sub-assembly.


b.
A424570C01
0.135,0.104 0.448,0.26 0.313,0.156 10 true *A 0.177,2.583 0.49,2.74 0.313,0.156 10 true *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Slide the clamp and disconnect the No. 8 water by-pass hose from the No. 3 water by-pass pipe sub-assembly.


c.

Remove the 2 bolts and No. 3 water by-pass pipe sub-assembly from the No. 1 EGR cooler.


Hide 16209 19.DISCONNECT NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A424502

w/ Urea SCR System:

Slide the 2 clamps and remove the No. 17 water by-pass hose from the No. 1 EGR pipe sub-assembly and No. 4 water by-pass pipe sub-assembly.


b.
A424571C01
0.156,0.115 0.469,0.271 0.313,0.156 10 true *A 0.198,2.583 0.51,2.74 0.313,0.156 10 true *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Slide the clamp and disconnect the No. 7 water by-pass hose from the No. 1 EGR cooler.


c.

Slide the clamp and disconnect the water hose from the No. 2 EGR valve assembly.


d.

Remove the 2 bolts and disconnect the No. 4 water by-pass pipe sub-assembly from the intake manifold.


Hide 25601 20.DISCONNECT NO. 1 EGR PIPE SUB-ASSEMBLY

a.
A454610C01
0.104,0.156 0.417,0.313 0.313,0.156 10 false *A 0.115,2.542 0.427,2.698 0.313,0.156 10 false *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Remove the 2 nuts and disconnect the No. 1 EGR pipe sub-assembly from the EGR valve adapter.


b.
A454611C01
0.094,0.115 0.406,0.271 0.313,0.156 10 false *A 0.115,2.458 0.427,2.615 0.313,0.156 10 false *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Using an E8 "TORX" socket wrench, remove the 2 stud bolts from the No. 2 EGR valve assembly.


Hide 22.REMOVE NO. 1 EGR COOLER WITH NO. 2 EGR VALVE ASSEMBLY

a.
A454585

w/o Urea SCR System:

Remove the 4 bolts and No. 1 EGR cooler with No. 2 EGR valve assembly from the intake manifold.


b.
A454593

w/ Urea SCR System:

Remove the 4 bolts, No. 2 intercooler support bracket and No. 1 EGR cooler with No. 2 EGR valve assembly from the intake manifold.


c.

Remove the gasket.


Hide 25624 23.REMOVE EGR VALVE ADAPTER

a.
A454586

Remove the 2 bolts and EGR valve adapter from the No. 2 EGR valve assembly.


b.

Remove the gasket.


Hide 25630 24.REMOVE NO. 2 EGR VALVE ASSEMBLY

a.
A424575C01
0.146,0.146 0.458,0.302 0.313,0.156 10 false *A 0.177,2.51 0.49,2.667 0.313,0.156 10 false *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Remove the 4 bolts and No. 2 EGR valve assembly from the No. 1 EGR cooler.


b.

Remove the gasket.


c.
A454587

Using an E8 "TORX" socket wrench, remove the 2 stud bolts from the No. 2 EGR valve assembly.