Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EGR BYPASS VALVE SWITCHING VALVE › from 2018.06
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260621 EGR BYPASS VALVE SWITCHING VALVE A

1GD-FTV EMISSION CONTROL  EGR BYPASS VALVE SWITCHING VALVE  INSTALLATION  


PROCEDURE

Hide 25860 1.INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

a.

Install the No. 1 vacuum switching valve assembly to the bracket with the screw.

Torque:
1.4 N*m (14 kgf*cm, 12 in.*lbf)


b.

Connect the vacuum hose to the No. 1 vacuum switching valve assembly.


Hide 25804 2.INSTALL VACUUM CONTROL VALVE SET

a.

Connect the vacuum hose to the vacuum control valve set.


b.

Install the vacuum control valve set to the intake manifold with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the 2 vacuum hoses to the No. 2 vacuum transmitting pipe sub-assembly and No. 2 EGR valve assembly.


d.

Connect the connector to the vacuum control valve set.


e.

Connect the engine wire bracket with the bolt.

Torque:
12.8 N*m (131 kgf*cm, 9 ft.*lbf)


Hide 17940D 3.INSTALL INTERCOOLER ASSEMBLY (w/ Urea SCR System)

Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/o Urea SCR System)