Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EXHAUST FUEL ADDITION INJECTOR › from 2018.06
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260624 EXHAUST FUEL ADDITION INJECTOR A

1GD-FTV EMISSION CONTROL  EXHAUST FUEL ADDITION INJECTOR  REMOVAL  


PROCEDURE

Hide 12601B 3.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/o Urea SCR System)

Hide 17940D 4.REMOVE INTERCOOLER ASSEMBLY (w/ Urea SCR System)

Hide 23811H 5.REMOVE NO. 1 FUEL PIPE

a.
A424585C01
0.083,0.073 0.396,0.229 0.313,0.156 10 true *A 0.115,2.531 0.427,2.688 0.313,0.156 10 true *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Remove the bolt, union bolt and gasket and disconnect the No. 1 fuel pipe from the cylinder head cover sub-assembly and exhaust fuel addition injector assembly.


b.
A424586C01
0.104,0.104 0.417,0.26 0.313,0.156 10 true *A 0.135,2.521 0.448,2.677 0.313,0.156 10 true *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Disconnect the No. 4 fuel pipe and remove the No. 1 fuel pipe (See page Engine / Hybrid System>1GD-FTV (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 16281 7.DISCONNECT NO. 4 WATER BY-PASS HOSE

a.
A424587C01
0.104,0.094 0.417,0.25 0.313,0.156 10 true *A 0.177,2.552 0.49,2.708 0.313,0.156 10 true *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Slide the clamp and disconnect the No. 4 water bypass hose from the No. 1 injector holder.


Hide 16282 8.DISCONNECT NO. 5 WATER BY-PASS HOSE

a.

Slide the clamp and disconnect the No. 5 water by-pass hose from the No. 1 injector holder.


Hide 23295D 9.REMOVE NO. 1 INJECTOR HOLDER

a.
A424588C01
0.083,0.094 0.396,0.25 0.313,0.156 10 true *A 0.156,2.573 0.469,2.729 0.313,0.156 10 true *B
*A w/o Urea SCR System
*B w/ Urea SCR System


Remove the connector from the exhaust fuel addition injector assembly.


b.
A352103

Remove the 3 nuts and No. 1 injector holder from the exhaust manifold.


Hide 17168 10.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

a.
A343917

Remove the 3 nuts and No. 2 exhaust manifold heat insulator from the No. 1 injector holder.


b.

Remove the gasket.


Hide 23295C 11.REMOVE INJECTOR HOLDER

a.
A343918

Remove the 2 bolts and injector holder from the No. 1 injector holder.


Hide 23695B 12.REMOVE NO. 2 NOZZLE HOLDER CLAMP

a.
A343919

Using a T40 "TORX" socket wrench, remove the bolt and No. 2 nozzle holder clamp from the No. 1 injector holder.


Hide 23710B 13.REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY

a.
A343920

Remove the exhaust fuel addition injector assembly from the No. 1 injector holder.


b.
A343923

Remove the gasket from the No. 1 injector holder.


c.
A343921

Remove the E-ring from the exhaust fuel addition injector assembly.


d.
A343922

Remove the No. 3 fuel injector back-up ring, O-ring, No. 2 fuel injector back-up ring and No. 1 fuel injector back-up ring from the exhaust fuel addition injector assembly.