86280
1.INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
86286
2.INSTALL NO. 2 AMPLIFIER BRACKET
Install the No. 2 amplifier bracket with the 2 screws.
86285
3.INSTALL NO. 1 AMPLIFIER BRACKET
Install the No. 1 amplifier bracket with the 2 screws.
86287C
4.INSTALL NO. 2 AMPLIFIER COVER (for JBL Made)
Install the No. 2 amplifier cover with the bolt and screw.
Attach the clamp.
5.INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET
for Pioneer Made, Type A:
| *a | Bolt |
| *b | Screw |
Temporarily install the stereo component amplifier assembly with bracket.
Install the bolt and screw.
Connect each connector.
for Pioneer Made, Type B:
| *a | Bolt |
| *b | Screw |
Attach the guide to temporarily install the stereo component amplifier assembly with bracket.
Install the bolt and 2 screws.
Connect each connector.
for JBL Made:
| *a | Bolt |
| *b | Screw |
Attach the guide to temporarily install the stereo component amplifier assembly with bracket.
Install the bolt and 2 screws.
Connect each connector.
86287B
6.INSTALL AMPLIFIER COVER
for Pioneer Made, Type A:
Install the amplifier cover with the 3 clips.
for Pioneer Made, Type B:
Install the amplifier cover with the clip and 3 screws.
Attach the clamp.
for JBL Made:
Install the amplifier cover with the 3 clips.
Return the floor carpet to its original position.
7.INSTALL FRONT SEAT ASSEMBLY RH
for Manual Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION
for Power Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>INSTALLATION
for Walk in Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Walk in Seat Type)>INSTALLATION
for Bench Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Bench Seat Type)>INSTALLATION
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
10.CHECK SRS WARNING LIGHT