Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST ECU (for LHD) › from 2020.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261003 PARKING ASSIST ECU(for LHD) A

PARK ASSIST / MONITORING  PARKING ASSIST ECU(for LHD)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Be sure to read Precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION


NOTICE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


Hide 55317A 5.REMOVE INSTRUMENT SIDE PANEL RH

Hide 55461A 6.REMOVE INSTRUMENT PANEL ORNAMENT

Hide 55607 7.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55550 8.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 86792C 9.REMOVE PARKING ASSIST ECU

B356820

a.

Disconnect each connector.


b.

Remove the 2 bolts and parking assist ECU.