Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › 2020.08–2021.06
RM27T0E _58 Vehicle Interior _053741 INTERIOR PANELS / TRIM _0261213 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1. TABLE OF BOLT, SCREW AND NUT

HINT:

All bolts, screws and nuts relevant to installing and removing the instrument panel are shown along with their alphabet code in the table below.


B240747E04
1.948,2.938 2.396,3.104 0.448,0.167 10 false L = 18 1.979,3.104 2.458,3.281 0.479,0.177 10 false (0.709) 1.938,2.531 2.167,2.729 0.229,0.198 10 false φ 8 1.979,2.688 2.458,2.875 0.479,0.188 10 false (0.315) 5.385,3.198 6.75,3.396 1.365,0.198 10 false mm (in.) (L = Length) 0.417,0.448 0.781,0.625 0.365,0.177 10 false Code 0.469,1.156 0.76,1.333 0.292,0.177 10 false <A> 2.604,1.146 2.896,1.323 0.292,0.177 10 false <B> 4.729,1.146 5.021,1.323 0.292,0.177 10 false <C> 0.448,2.01 0.74,2.188 0.292,0.177 10 false <D> 2.594,2.021 2.885,2.198 0.292,0.177 10 false <E> 1.354,0.448 1.802,0.625 0.448,0.177 10 false Shape 2.552,0.438 2.917,0.615 0.365,0.177 10 false Code 3.552,0.448 4,0.625 0.448,0.177 10 false Shape 4.677,0.448 5.042,0.625 0.365,0.177 10 false Code 5.667,0.448 6.115,0.625 0.448,0.177 10 false Shape 1.927,0.833 2.156,1.031 0.229,0.198 10 false φ 5 2,1.021 2.479,1.208 0.479,0.188 10 false (0.197) 1.927,1.229 2.375,1.396 0.448,0.167 10 false L = 14 2,1.406 2.479,1.583 0.479,0.177 10 false (0.551) 4.094,2.083 4.542,2.25 0.448,0.167 10 false L = 20 4.125,2.24 4.604,2.417 0.479,0.177 10 false (0.787) 4.083,1.688 4.313,1.885 0.229,0.198 10 false φ 6 4.125,1.865 4.604,2.052 0.479,0.188 10 false (0.236) 6.177,0.844 6.406,1.042 0.229,0.198 10 false φ 6 6.271,1.021 6.75,1.208 0.479,0.188 10 false (0.236) 4.719,2.021 5.01,2.198 0.292,0.177 10 false <F> 0.469,2.875 0.76,3.052 0.292,0.177 10 false <G> 4.052,0.844 4.281,1.042 0.229,0.198 10 false φ 5 4.115,1.01 4.594,1.198 0.479,0.188 10 false (0.197) 4.021,1.229 4.458,1.396 0.438,0.167 10 false L = 18 4.104,1.417 4.583,1.594 0.479,0.177 10 false (0.709) 6.198,1.229 6.646,1.396 0.448,0.167 10 false L = 22 6.271,1.417 6.75,1.594 0.479,0.177 10 false (0.866) 6.094,1.854 6.323,2.052 0.229,0.198 10 false φ 6 6.156,2.031 6.635,2.219 0.479,0.188 10 false (0.236) 1.969,2.115 2.417,2.281 0.448,0.167 10 false L = 22 1.99,2.271 2.469,2.448 0.479,0.177 10 false (0.866) 1.948,1.708 2.177,1.906 0.229,0.198 10 false φ 6 1.99,1.865 2.469,2.052 0.479,0.188 10 false (0.236)

Hide 2. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

a.

Disable the auto tilt away function by changing the customize parameter

Click hereSteering>STEERING COLUMN>POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM>CUSTOMIZE PARAMETERS

NOTICE:

Record the current customize parameter setting (whether the auto tilt away function is enabled or disabled) in order to restore the current setting after finishing the operation.



b.

Turn the ignition switch to ON. Operate the tilt and telescopic switch to fully extend and lower the steering column assembly.


Hide 3. PRECAUTION

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 4.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 84140 5.REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

Hide 6.REMOVE FRONT SEAT ASSEMBLY LH

Hide 7.REMOVE FRONT SEAT ASSEMBLY RH

a.

for Manual Seat:

HINT:

Use the same procedure described for the LH side.



b.

for Power Seat:

HINT:

Use the same procedure described for the LH side.




Hide 67920 10.REMOVE DOOR SCUFF PLATE ASSEMBLY LH

Hide 67910 11.REMOVE DOOR SCUFF PLATE ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62112 12.REMOVE COWL SIDE TRIM BOARD LH

Hide 62111C 13.REMOVE COWL SIDE TRIM BOARD RH

HINT:

Use the same procedure described for the LH side.


Hide 62312B 14.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62311B 15.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 74616C 16.REMOVE FRONT NO. 1 ASSIST GRIP PLUG LH

Hide 74615E 17.REMOVE FRONT NO. 1 ASSIST GRIP PLUG RH

HINT:

Use the same procedure described for the LH side.


Hide 62212 19.REMOVE FRONT PILLAR GARNISH LH

Hide 62211 20.REMOVE FRONT PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 86160J 21.REMOVE FRONT NO. 3 SPEAKER ASSEMBLY

Hide 55318C 22.REMOVE INSTRUMENT SIDE PANEL LH

B238205C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the instrument side panel LH.


b.

Using a moulding remover, detach the 5 clips, claw and 3 guides and remove the instrument side panel LH.


Hide 55471A 23.REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

B238207C02
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the instrument cluster finish panel ornament.


b.

Using a moulding remover, detach the 3 clips and remove the instrument cluster finish panel ornament.


Hide 55476C 24.REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

a.

w/ Entry and Start System:

i.
B486186

Detach the 4 clips.


ii.

Disconnect each connector and remove the instrument panel finish plate garnish.



b.
B486187

w/o Entry and Start System:

i.

Detach the 4 clips.


ii.

Disconnect each connector and remove the instrument panel finish plate garnish.



Hide 55480D 25.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

a.
B478489C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the lower instrument panel finish panel assembly.


b.
B486188

Detach the 4 clips.


c.

Disconnect each connector and remove the lower instrument panel finish panel assembly.


Hide 55045 26.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

B239280C03
0,0 0,0 false
V100155

Protective Tape


a.

Using a screwdriver, detach the 2 claws and open the cover.

HINT:

Tape the screwdriver tip before use.



b.
B486189

w/o Knee Airbag:

i.

Remove the 2 bolts <C>.


ii.

Detach the 7 clips.


iii.

Disconnect each connector and each cable and remove the lower instrument panel finish panel sub-assembly.



c.
B486190

w/ Knee Airbag:

i.

Remove the 2 bolts <C>.


ii.

Detach the 14 clips.


iii.

Disconnect each connector and each cable and remove the lower instrument panel finish panel sub-assembly.



Hide 73900 27.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

Hide 55404D 28.REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

a.
B486191

except 5L-E:

i.

Detach the 4 claws, 2 clips and 2 guides and remove the instrument cluster finish panel sub-assembly.


ii.

Disconnect the connector.



b.

for 5L-E:

i.
B238210

Detach the 4 claws, 2 clips and 2 guides and remove the instrument cluster finish panel sub-assembly.


ii.

Disconnect the connector.



Hide 83100 29.REMOVE COMBINATION METER ASSEMBLY

Hide 55317A 30.REMOVE INSTRUMENT SIDE PANEL RH

B238212C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the instrument side panel RH.


b.

Using a moulding remover, detach the 5 clips, claw and 3 guides.


c.

Disconnect the connector and remove the instrument side panel RH.


Hide 55461A 31.REMOVE INSTRUMENT PANEL ORNAMENT

B238217C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the instrument panel ornament.


b.

Using a moulding remover, detach the 5 clips and remove the instrument panel ornament.


Hide 55550 32.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

B238219C01
2.823,2.667 3.031,2.854 0.208,0.188 10 true *1 0.469,2.656 0.677,2.844 0.208,0.188 10 true *1 2.063,1.375 2.271,1.563 0.208,0.188 10 false *2 0.635,1.365 0.844,1.552 0.208,0.188 10 true *2
*1 Bolt
*2 Screw


a.

Remove the 2 bolts <C> and 2 screws <A> or <B>.


b.

Detach the 5 clips and claw.


c.

Disconnect each connector and remove the glove compartment door assembly.


Hide 85970A 33.REMOVE DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (w/ Telematics Transceiver, Double Door Lock)

Hide 86740 34.REMOVE TELEPHONE TRANSCEIVER ASSEMBLY (w/ Telematics Transceiver)

Hide 89533 35.REMOVE 4 WHEEL DRIVE CONTROL ECU

Hide 55420A 36.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Audio)

B486192

a.

Detach the 10 clips and remove the center instrument cluster finish panel assembly.


b.

Disconnect each connector.


Hide 55420A 37.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Radio Receiver Type)

HINT:

Use the same procedure described for the center instrument cluster finish panel (w/o Audio).


Hide 55522B 38.REMOVE RADIO TUNER OPENING COVER (w/o Audio)

B238208

a.

Remove the 4 bolts and radio tuner opening cover.


Hide 86120 39.REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

Hide 40.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

Hide 55406B 41.REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Module Switch)

B238201

a.

Remove the 2 bolts <E>.


b.

Detach the 3 clips and guide and remove the lower center instrument cluster finish panel sub-assembly.


Hide 84970 42.REMOVE COMBINATION SWITCH ASSEMBLY (w/ Module Switch)

Hide 55421B 43.REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

B486194

a.

Detach the 8 clips and 3 guides and remove the upper instrument cluster finish panel.


Hide 86160L 44.REMOVE FRONT NO. 4 SPEAKER ASSEMBLY

Hide 55650 45.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

B238221

a.

Detach the 4 clips and remove the No. 1 instrument panel register assembly.


Hide 55660 46.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

HINT:

Use the same procedure described for the No. 1 instrument panel register assembly.


Hide 55408F 47.REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

B238223C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 1 instrument panel speaker panel sub-assembly.


b.

Using a screwdriver, detach the 2 clips, claw, and 2 guides and remove the No. 1 instrument panel speaker panel sub-assembly.

HINT:

Tape the screwdriver tip before use.



Hide 55409F 48.REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

HINT:

Use the same procedure described for the No. 1 instrument panel speaker panel sub-assembly.


Hide 86160P 49.REMOVE FRONT NO. 2 SPEAKER ASSEMBLY

Hide 55401E 50.REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

a.

for LHD:

i.

Partially remove the floor carpet.

HINT:

It is not necessary to fully remove the floor carpet. Partially remove it so that the No. 2 instrument panel wire can be removed in a later step.



ii.

Remove the 6 bolts <E> and nut <F>.


iii.

Remove the 2 passenger airbag bolts <G>.


iv.

Remove the 4 bolts, 2 nuts and 2 brackets.


v.

Disconnect the connectors and detach the clamps and claws.


vi.

Detach the 2 guides and remove the instrument panel safety pad sub-assembly.

B361966C03
3.469,4.677 3.75,4.771 false 3.75,4.771 3.875,4.771 false 6.563,6.438 6.167,6.354 6.167,6.354 5.99,6.354 true 1,2.604 1.229,2.813 0.229,0.208 10 false *1 3.323,5.25 3.552,5.458 0.229,0.208 10 false *1 1.958,5.26 2.188,5.469 0.229,0.208 10 false *1 4.823,4.021 5.052,4.229 0.229,0.208 10 true *1 6.354,2.583 6.583,2.792 0.229,0.208 10 false *1 5.438,1.427 5.667,1.635 0.229,0.208 10 false *1 5.479,4.479 5.708,4.688 0.229,0.208 10 true *3 6.646,4.5 6.875,4.708 0.229,0.208 10 true *3 3.042,0.177 3.271,0.385 0.229,0.208 10 false *b 3.865,4.688 4.094,4.896 0.229,0.208 10 true *a 5.823,6.271 6.052,6.479 0.229,0.208 10 true *a 2.781,4.708 3.01,4.917 0.229,0.208 10 false *2
*1 Bolt <E> *2 Nut <F>
*3 Bolt <G> - -
*a Bracket *b Guide




b.

for RHD:

i.

Partially remove the floor carpet.

HINT:

It is not necessary to fully remove the floor carpet. Partially remove it so that the No. 2 instrument panel wire can be removed in a later step.



ii.

Remove the 6 bolts <E> and nut <F>.


iii.

Remove the 2 passenger airbag bolts <G>.


iv.

Remove the 4 bolts, 2 nuts and 2 brackets.


v.

Disconnect the connectors and detach the clamps and claws.


vi.

Detach the 2 guides and remove the instrument panel safety pad sub-assembly.

B361859C02
3.323,4.74 3.469,5.115 true 5.833,6.313 5.99,6.313 5.99,6.313 6.458,6.427 true 5.375,1.385 5.615,1.583 0.24,0.198 10 false *1 0.917,2.594 1.156,2.792 0.24,0.198 10 false *1 6.375,2.438 6.615,2.635 0.24,0.198 10 false *1 5.281,4.396 5.521,4.594 0.24,0.198 10 false *1 3.063,5.094 3.302,5.292 0.24,0.198 10 false *1 1.969,5.25 2.208,5.448 0.24,0.198 10 false *1 5.677,6.229 5.875,6.406 0.198,0.177 10 true *a 3.417,5.115 3.615,5.292 0.198,0.177 10 true *a 6.115,3.313 6.354,3.51 0.24,0.198 10 false *2 1.385,6.438 1.583,6.615 0.198,0.177 10 true *3 2.375,6.448 2.573,6.625 0.198,0.177 10 true *3 2.26,0.24 2.5,0.438 0.24,0.198 10 true *b
*1 Bolt <E> *2 Nut <F>
*3 Bolt <G> - -
*a Bracket *b Guide