Home › Suspension › SUSPENSION CONTROL › SUSPENSION CONTROL ECU › from 2020.08
RM27T0E _53 Suspension _053706 SUSPENSION CONTROL _0260877 SUSPENSION CONTROL ECU A

SUSPENSION CONTROL  SUSPENSION CONTROL ECU  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Be sure to read Precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION


NOTICE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


Hide 73900 3.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)

Hide 55550 4.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

Hide 89293 5.REMOVE SUSPENSION CONTROL ECU

a.
C212880

Disconnect the 3 connectors.


b.

Remove the 2 bolts and suspension control ECU.

NOTICE:

Replace the suspension control ECU with a new one if it is dropped.